WATER STILL (WALL MOUNTING TYPE)

This unit is recommended for making pyrogen free water of a very high degree of purity. This still is fitted with special kettle element with ejection device to run with or without water. The complete unit is made of stainless steel except tap. The apparatus is suitable to work on 220V AC supply.

Available in following capacities

MUFFLE FURNACE RECTANGULAR

Muffle Furnaces are designed to meet the requirements of varied customers in Educational Research and Industrial fields.

Construction

The outer casting is made of double walled thick P.C.R.C. sheet re-attached with thick perforated sheet on the bottom portion, powder coating with attractive stove enamel. The distinct feature of perforated sheet is to prevent the temperature control unit from very high heat. Furnace is lagged with Light weight with ceramic fibre wool insulation (instead of brick insulation). Heating elements are made of CARELABMED - A1 wire of coil form embedded on the muffle with high grade refractory cement and backed by high temperature cer-wool insulation which avoids loss of energy. This arrangement will ensure the most uniform kind of distribution of heat. The weight & size of furnace is of one quarter and 30% respectively as compared to brick furnace.

A safety thermal fuse is provided to fuse of when the temperature exceeds the set temperature. 

A viewing cap is also provided on the door. Temperature control unit consists of a microprocessor based digital PID temperature indicator cum controller, fitted in front of furnace with two indicator lamps. The apparatus is complete with One thermocouple, silver thermal fuse, main lead with power plug to work on 220/230 V or 400/440 V AC.

Available in following sizes

Other chamber capacities as per customer's requirement can also be manufactured.

Optional Accessories

• Spare muffle for Muffle Furnace

LABORATORY ELECTRIC OVEN (TEMP. RANGE UP TO 300°C)

Construction

LABORATORY ELECTRIC OVEN (TEMP. RANGE UP TO 250°C)

Construction

 Ovens are sturdy, with double walled construction. Inner chamber made of ALUMINIUM or STAINLESS STEEL sheet. Outer chamber is made of mild steel sheet duly powder coated. The gap between the walls is filled up with special grade glass wool for proper insulation to avoid heat losses. Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves. The oven door is mounted on heavy hinges with a handle. Door is duly insulated.

Heating elements are made of high quality nichrome wire which are put inside beads and placed at the bottom and in both the side ribs for uniform temperature all over the work space. , Sheet heaters are also available for specific requirements.

The temperature range of the hot air oven shall be from 50°C to 250°C controlled by a Digital PID controller along with air circulation system for best accuracy.

In this system there is one path of circulating hot air in between the inner chamber and the insulation with the help of an air duct. Forced air moved by the motorized blower is called the PERFECT SYSTEM. It results in minimum temperature variation at any point in the working space.

Air Ventilators are placed near the top of the both sides to remove hot gases and fumes if any.

Comprising of switch to ON/OFF the power, rotary switch to select high or low rates of heating, Digital PID controller and indicators for mains and heating. Supplied with cord and plug. Designed to operate on 220 volts, Single Phase, 50 Hz, AC supply. (Please specify for any customization) 

Optional Accessories

• Timer

LABORATORY ELECTRIC OVEN (PERFECT SYSTEM UP TO 350°C & 450°C)

Construction

VACUUM OVEN

 vacuum ovens are required in almost every institution for drying, moisture removal by heating in vacuumed environment.

The inner rectangular/cylindrical chamber is made of highly polished thick stainless steel.

The outer body is made of Mild Steel duly powder coated.

INCUBATOR BACTERIOLOGICAL

incubators are the perfect choice for reliable day to day operation in variety of uses. Drying of slides, paraffin embedding, and tissue culture work, incubation of antibody test, excellent for Microbiological determinations, crystallization studies and incubation of hydroxy steroids.

Construction

carelabmed incubators are sturdy, with double walled construction with complete inner chamber made of Anodized Aluminium or Highly Polished Stainless Steel. Outer chamber is made of Mild Steel Sheet, duly powder coated. 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber fabricated with ribs for adjusting shelves to convenient height. Supplied with 2 or 3 removable shelves. SHELVES are made of fully Anodized Aluminium Sheet or Polished Stainless Steel Sheet as per chamber. Door is insulated & fitted with heavy hinges. Door has Double glass window which facilitate inspection of samples without disturbing the thermal conditions. Heating elements, made of high grade imported nichrome wire are put inside the porcelain beads and placed at the bottom and side ribs for uniform temperature all over the space.

Temperature is controlled by capillary type thermostat from ambient to 80°C. Temperature control knob is graduated in centigrade degrees after actually observing the temperature in steady state. An L-shaped prismatic glass Thermometer is fitted on top of the Incubator for reading the chamber temperature.

Air ventilators are provided on both sides at top to flue away any gas or fumes.

The equipment is provided with a panel having a thermostat control knob, ON/OFF switch and two pilot lamps.

Supplied with cord and plug & designed to operate on 220 V single phase, 50 Hz, AC supply. (Model with 110V supply is also available).

Optional Accessories

• Timer
• Air Circulating Fan
• Digital Indicator - cum - Controller Electronic in lieu of L-shaped thermometer & thermostat.
• Micro processor based PID Temp. Controller-cum-indicator in lieu of thermostat & L-shaped thermometer.

EGG INCUBATOR

Egg Incubator is elegantly designed, fabricated and tested to suit various applications in ever growing field of Agriculture Colleges/Universities, small and big potters, Hotels etc. for easy and convenient handling and hatching operation in research work.

Temperature range is from ambient +5°C to 70°C ± 1°C controlled by thermostat.

egg incubators are the most versatile and highly reliable for egg incubation. 

Outer body is made of MS sheet, duly powder coated. It is highly insulated. The inner chamber is made of aluminium or Stainless steel sheet. Door is with double glass viewing windows to facilitate easy inspection of interior

Control Panel

The control panel consists of a thermostat control knob, pilot light, main ON/OFF switch etc.

The incubator is designed to operate on 220V Single Phase AC Supply.

• 50 Eggs
• 100 Eggs
• 200 Eggs
• 250 Eggs
• 400 Eggs
• 1000 Eggs
• 2000 Eggs
• 5000 Eggs
• 10,000 Eggs
• 20,000 Eggs

POULTRY INCUBATOR

Elegantly designed, fabricated and tested to suit various applications in ever growing field of Agriculture Colleges/Universities, small and big potters, Hotels etc. for easy and convenient handling and hatching operation in research work.

Temperature range is from ambient +5°C to 70°C ± 1°C controlled by thermostat.
carelabmed egg incubators are the most versatile and highly reliable for egg incubation. 

Outer body is made of MS sheet, duly powder coated. It is highly insulated. The inner chamber is made of aluminium or Stainless steel sheet. Door is with double glass viewing windows to facilitate easy inspection of interior.
The chamber trays are provided with manual tilting mechanism.
Water tank is provided at bottom. It has small windows for filling water in it. Water heater is fixed in the tank. Air circulating fan ensure uniform temperature inside the chamber. Incubation in generally done at 37°C or 56°C. Temperature is controlled by thermostat. L-shaped thermometer provided on top front of cabinet.

Control Panel

INCUBATOR UNIVERSAL & OVEN UNIVERSAL COMBINED

This combined module consists of two chambers. The top chamber of the unit work as Oven Universal and bottom chamber work as Incubator Universal. The inner chamber is made of anodized aluminium or Stainless steel and outer made of mild steel duly powder coated. The temp. is controlled by two separate digital indicators cum controllers. The instrument is supplied with forced air circulation fan for uniformity in temperature.

The machine is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).

Inner chamber Size

HYBRIDIZATION INCUBATOR

Hybridization incubators are designed to fulfill the requirements of day-to-day laboratory work. The durable high precision rotating convection oven is used for blot hybridization & other applications.

Construction

B.O.D. INCUBATOR (DELUX-AUTOMATIC)

Most versatile and highly reliable low temperature incubator, to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, lever extracts, chemicals etc.

Construction

B.O.D. INCUBATOR (SUPER DELUX-AUTOMATIC)

Most versatile and highly reliable low temperature incubator, to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, lever extracts, chemicals etc.

Construction

Robust Construction. Outer cabinet is made of M.S. Sheet, duly powder coated. Inner chamber is made of high polished stainless steel/aluminium. It has provision for allowing wide range of shelf positions & spacing. SS/Aluminium trays are also provided. Chamber is duly insulated to minimise heat loss. Two doors are provided. Outer door is insulated and is fitted with gasket for air tight closing for no temperature loss. Door is provided with lock and key. Inner door is made of transparent acrylic glass for inspecting the specimens inside chamber, without disturbing the thermal conditions.

The temp. of the incubator is controlled by a PID digital temperature controller cum indicator, range from 5°C to 60°C ± 0.5°C. Hermetically sealed, high performance compressor works efficiently to lower the inside chamber temperature. Heating elements are placed in the path of moving air duly insulated from the body. Evaporator coils also lie in the air circulation path. A forced air type circulation is kept inside the chamber with the help of fans to keep uniform temp. throughout the inner chamber. The incubator is also fitted with a door operated lamp for illumination inside the chamber. Caster wheels are provided at bottom for easy mobility.

All controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting keys allow the user to set any desired temp.

BOD INCUBATOR switches from heating to cooling and vice versa irrespective of the ambient temperature because of its unique design and thus is capable of working without any user intervention. Supplied complete with 3 shelves of anodized Aluminium or Stainless Steel as per the chamber, cord and plug, to work on 220 Volts, Single phase, 50 Hz, AC supply.

Optional Accessories

• Interior illumination with 3 Nos. fluorescent tubes of 60 cm
• Automatic cyclic timer 0-24 hrs. regulating illumination cycle
• Arrangement for incubation carbon dioxide & air mixture with a inlet nozzle provided with a means of admitting of carbon dioxide

CO₂ INCUBATOR - CARBON DIOXIDE INCUBATOR

 CO2 Incubator provides perfectly stabilized and sterilized environment for Cell Culture and study of temperature / Co2 on human tissues. The incubator incorporates SS 304 Construction and Copper enriched stainless steel alloy interior surfaces to eliminate contamination sources, mitigate the effects of airborne contaminants introduced through normal use and provides high degree of Germicidal Protection. Laboratories and medical professionals, world over, rely on our Co2 Incubators. And, therefore, we are considered top CO2 incubator manufacturer and Co2 incubator suppliers.

CO₂ INCUBATOR WITH O₂ CONTROL

CO₂ Incubator provides perfectly stabilized and sterilized environment for Cell Culture and study of temperature / CO₂ on human tissues. The incubator incorporates SS 304 Construction interior surfaces with rounded corners to eliminate contamination sources, mitigate the effects of airborne contaminants introduced through normal use and provides high degree of Germicidal protection. Four stainless steel height adjustable & removable shelves are provided with removable humidity reservoir to provide humidity up to 95%RH. The chamber consists of a 25mm access port for calibration & other uses. The outside body is made of Steel sheet duly powder coated for rust free performance. The complete incubator is mounted on castors for easy movement. The CO₂ incubator has a double door design. The front door is duly insulated fitted with heavy hinges with mechanical latch & key. The inner glass door has separate airtight doors to prevent condensation. The inner glass door consists of mechanical latch to provide perfect seal against the silicone gasket. The user can view the specimens inside without disturbing the vital conditions. Independent door heater prevents condensation. carelabmed CO₂ Incubator uses six sided Direct Heat steam jacket fan-less gentle convection Heating System which surrounds the inner chamber walls. This technique achieves accurate, uniform and highly responsive temperature control within the chamber with no overshoot. This eliminates vibration & reduces sample evaporation.

The Dual Beam Infrared CO₂ sensor with auto zero function is linked to microprocessor controller with a sophisticated PID algorithm. This ensures Ultra-Fast recovery without overshoot and accurate CO₂ averages even with frequent access with multiple door openings.

All instruments functions including the temperature, CO₂%,O₂%, Humidity % & timer of the incubator are programmable with a facility for a selectable alarm for each parameter. The easy to read bright large 7” colored touch screen microprocessor control with all set and process temperature (linked to highly accurate PT-100 sensor), CO₂%, O₂%, and Humidity % and audio - visual alarm for each parameter including low water alarm, temperature deviation (+/-0.5°C), CO₂%, O₂%, humidity & provides stabilized and accurate controls. The alarms can be muted by touch of MUTE key. The controller also signifies when the timer is over. In built auto diagnostics for fault detection with error codes & identification of system status for easy trouble-shooting. The user-friendly comprehensive touch screen provides at a glance viewing of all the parameters, help screens, graphs, active alarms & other diagnostics. The chamber consists of interior light with on/off via touch screen. The microprocessor with non volatile memory logs the data for 72 hours for temperature, CO₂ level,O₂ level, door opening & other alarms. The data remains saved regardless of time & power failure & can be downloaded in a pen drive by a USB port available on board & then can be documented & printed. Standard ethernet port allows the user to operate the machine from a remote location (connect to a PC). RS-232 port for data communication is also an added advantage.

• Independent safety over temperature cut out
• Independent alarm system with back up microprocessor to auto switch over in case main controller fails
• Password protected menu for safety

Technical Data Utility Connections:

CO₂Gas Connections:
1/4” [6.3 mm] tubing connections with HEPA filter (99.98% efficiency) on CO₂ inlet

N₂ Gas Connections: 
1/4” [6.3 mm] tubing connections with HEPA filter (99.98% efficiency) on CO₂ inlet

20PSIG[1.4BAR]
Two stage gas regulators required 

Performance Specifications

Timer:
1 minute to 100 hours

Temperature Range:
Ambient +5°C to 55°C

Temperature Control Accuracy:
± 0.5°C

Temp. Recovery:
0.5°C/minute 

CO₂ Range:
0.1 to 20.0%

C0₂ Control accuracy & uniformity:
±0.4%

CO₂ Recovery:
1.0%/minute (Fast recovery after door opening)

O₂ Range:
0.1 to 18.0% using Zirconia based sensor

Electrical Requirements:
220 V AC, 50 Hz. Single phase with resettable over current breaker. (Model with 110V also available)

Startup Power:
130Watts. 

Running power at 37°C:
75Watts.

Chamber Capacity Available

. 80Ltrs. 
. 120 Ltrs.
. 180 Ltrs.
. 300 Ltrs.
. 450 Ltrs.

Other chamber capacities can also be manufactured as per the customer requirement.

. UPS with maintenance free battery backup 
. CO₂ gas cylinder, double stage regulator, rubber hose & clamps
. N₂ gas cylinder, double stage regulator, rubber hose & clamps
 

HUMIDITY & TEMPERATURE CONTROL CABINET

Humidity and temperature control Cabinets are well designed for conducting different laboratory and research experiments for different quality control tests to be carried out on different materials e.g. cement motors, various electrical fittings, electronic circuits and components, cloth and paper etc. under controlled temp. and humidity conditions.

Construction

The cabinet is a robust ergonomic construction with the outer body made of Mild steel sheet duly powder coated & the inner chamber is made of Stainless steel. Caster wheels provided for easy mobility. Stainless steel trays are also provided for storage of samples. Inner chamber facilitates self placement at desired height. The chamber is insulated by filling glass wool in the space of between outer body and chamber to prevent temperature loss. Door is also insulated. Forced air circulation in the chamber by a blower ensures uniform temperature and humidity inside the chamber. Finned type heaters are provided in the moving air path. Humidity is achieved by generating of steam by immersion type water heater in water reservoir & its subsequent condensation in the circulating air.

Temperature is controlled by reliable imported thermostat from ambient to 55°C ± 1°C. Humidity is also controlled by imported thermostat which controls wet temperature for controlling humidity and switches off immersion heaters to stop generating steam. Arrangement exists only for increasing humidity & not for decreasing the humidity.

Ambient to 55°C ± 1°C.

Ambient to 95% ± 3% RH

W X H X D
455 × 710 × 455 mm
605 × 605 × 605 mm
605 × 910 × 605 mm

Optional Accessories

• Hygrometer
• Digital Temperature & humidity indicator cum controller

ENVIRONMENT CHAMBER (HUMIDITY SYSTEM)

Environment chamber is elegantly designed double walled cabinet to provide controlled atmosphere by varying temp. and Humidity for conducting of various R & D tests as, Plant & Animal growth test, Determination of dielectric test, packed material vapor test, Insulation test of electrical component. The inner Chamber is made of stainless steel & the outer body is made of Mild steel sheet duly powder coated. A heavy aligned door with a provision of see though window with toughened glass door is also provided.

Temp. range from 5 to 60°C ± 2°C and Rel. humidity ambient to 95% ± 5% are controlled with solid state digital controller cum indicator for displaying temp. & humidity in %age directly. 

Finned heaters help to achieve the set temperature above ambient whereas the hermetically sealed air cooled refrigeration system maintains the temperature below ambient. Humidity is generated by natural mist through spray system

Size of inner chamber

W X H X D
455 × 710 × 455 mm
605 × 605 × 605 mm
605 × 910 × 605 mm

• Fully Automatic Microprocessor control
• Internal log memory to store the error states history for temperature and humidity with time and date
• Remote machine monitoring and its operation through cell phone
• In built serial Thermal printer (Both Text and graph mode)
• Low/High Voltage detection & safety cut off feature
• Memory card log with 500MB memory
• Temperature profile control consisting of 40 or more ramps
• Touch screen control

SEED GERMINATOR (SINGLE CHAMBER)

Seed Germinator is designed for conducting various experiments on variety of seeds under different parameters of temperature, humidity etc. Atmospheric environment can thus easily be simulated within the laboratory to perform different experiments without going into the field, by creating desired conditions of temperature & humidity in the chamber of seed germinator. It is of double walled construction. Inner chamber is made of Stainless Steel & outer cabinet is made of Mild Steel sheet duly powder coated. High density Insulation is provided between inner chamber & outer body to minimise heat loss.

Temperature from ambient +5°C to 50°C ± 1°C is controlled by Digital temperature indicator cum controller.

The door is also provided with a viewing glass window to view the germination of seeds inside the chamber without disturbing the parameters inside the chamber. Forced air circulation ensures uniform temperature inside the chamber. The heating is done by finned heaters to maximize heat exchange process and to achieve the set temperature in a short time interval.

Humidity is achieved by a highly efficient ultrasonic humidifier. This humidification system ensures minimal variation in temperature while the humidity is being generated. S.S. Water reservoir at the bottom enables to generate the humidity from 60-95% controlled by humidistat. The control panel consists of a digital temperature indicator cum controller, humidistat, indicators & On/Off switch. The seed germinator is supplied complete with SS perforated trays.
The instrument is designed to operate on 220V single Phase AC Supply.

Other sizes as per customer's requirement can also be manufactured.

Optional features

• Fully Automatic Microprocessor control
• Internal log memory to store the error states history for temperature and humidity with time and date.
• Remote machine monitoring and its operation through cell phone.
• In built serial Thermal printer (Both Text and graph mode).
• Low/High Voltage detection & safety cut off feature.
• Memory card log with 500MB memory.
• Temperature profile control consisting of 40 or more ramps.
• Touch screen control

SEED GERMINATOR (SINGLE CHAMBER)

Seed Germinator is designed for conducting various experiments on variety of seeds under different parameters of temperature, humidity etc. Atmospheric environment can thus easily be simulated within the laboratory to perform different experiments without going into the field, by creating desired conditions of temperature & humidity in the chamber of seed germinator. It is of double walled construction. Inner chamber is made of Stainless Steel & outer cabinet is made of Mild Steel sheet duly powder coated. High density Insulation is provided between inner chamber & outer body to minimise heat loss. Temperature from 5°C to 50°C ± 1°C is controlled by Digital temperature indicator cum controller.

The temperature below ambient is achieved by highly efficient air cooled refrigeration system with complete accessories fitted at the bottom of the instrument. 

The door is also provided with a viewing glass window to view the germination of seeds inside the chamber without disturbing the parameters inside the chamber. Forced air circulation ensures uniform temperature inside the chamber. The heating is done by finned heaters to maximize heat exchange process and to achieve the set temperature in a short time interval.
Humidity is achieved by a highly efficient ultrasonic humidifier. This humidification system ensures minimal variation in temperature while the humidity is being generated. S.S. Water reservoir at the bottom enables to generate the humidity from 60-95% controlled by humidistat.
The control panel consists of a digital temperature indicator cum controller, humidistat, indicators & On/Off switch. The seed germinator is supplied complete with SS perforated trays.
The instrument is designed to operate on 220V single Phase AC Supply.

Other sizes as per customer's requirement can also be manufactured.

 Optional features

• Fully Automatic Microprocessor control
• Internal log memory to store the error states history for temperature and humidity with time and date.
• Remote machine monitoring and its operation through cell phone.
• In built serial Thermal printer (Both Text and graph mode).
• Low/High Voltage detection & safety cut off feature.
• Memory card log with 500MB memory.
• Temperature profile control consisting of 40 or more ramps.
• Touch screen control

SEED GERMINATOR (DUAL CHAMBER)

Seed Germinator is designed for conducting various experiments on variety of seeds under different parameters of temperature, humidity etc. Atmospheric environment can thus easily be simulated within the laboratory to perform different experiments without going into the field, by creating desired conditions of temperature & humidity in the chamber of seed germinator.

It is of double walled construction. Inner chambers are made of Stainless Steel & outer cabinet is made of Mild Steel sheet duly powder coated. High density Insulation is provided between inner chamber & outer body to minimise heat loss. One chamber has the temperature range from 5°C to 50°C ± 1°C & the other one has the temperature range from Ambient to 50°C ± 1°C both controlled by Digital temperature indicator cum controller. The temperature below ambient is achieved by highly efficient air cooled refrigeration system with complete accessories fitted at the bottom of the instrument. The door is also provided with a viewing glass window to view the germination of seeds inside the chamber without disturbing the parameters inside the chamber. Forced air circulation ensures uniform temperature inside the chamber. The heating is done by finned heaters to maximize heat exchange process and to achieve the set temperature in a short time interval. Humidity is achieved by a highly efficient ultrasonic humidifier. This humidification system ensures minimal variation in temperature while the humidity is being generated. S.S. Water reservoir at the bottom enables to generate the humidity from 60-95% controlled by humidistat. The control panel consists of a digital temperature indicator cum controller, humidistat, indicators & On/Off switch. The seed germinator is supplied complete with SS perforated trays. The instrument is designed to operate on 220V single Phase AC Supply.

Each chamber size shall be

Other sizes as per customer's requirement can also be manufactured.

 Optional features

• Fully Automatic Microprocessor control
• Internal log memory to store the error states history for temperature and humidity with time and date.
• Remote machine monitoring and its operation through cell phone.
• In built serial Thermal printer (Both Text and graph mode).
• Low/High Voltage detection & safety cut off feature.
• Memory card log with 500MB memory.
• Temperature profile control consisting of 40 or more ramps.
• Touch screen control

SEED GERMINATOR (DUAL CHAMBER)

Seed Germinator is designed for conducting various experiments on variety of seeds under different parameters of temperature, humidity etc. Atmospheric environment can thus easily be simulated within the laboratory to perform different experiments without going into the field, by creating desired conditions of temperature & humidity in the chamber of seed germinator. 

It is of double walled construction. Inner chambers are made of Stainless Steel & outer cabinet is made of Mild Steel sheet duly powder coated. High density Insulation is provided between inner chamber & outer body to minimise heat loss.

Both the chambers have temperature range from 5°C to 50°C ± 1°C which are controlled by two individual digital temperature indicators cum controllers.

The temperature below ambient is achieved by highly efficient air cooled refrigeration system with complete accessories fitted at the bottom of the instrument. 
The door is also provided with a viewing glass window to view the germination of seeds inside the chamber without disturbing the parameters inside the chamber. Forced air circulation ensures uniform temperature inside the chamber. The heating is done by finned heaters to maximize heat exchange process and to achieve the set temperature in a short time interval.
Humidity is achieved by a highly efficient ultrasonic humidifier. This humidification system ensures minimal variation in temperature while the humidity is being generated. S.S. Water reservoir at the bottom enables to generate the humidity from 60-95% controlled by humidistat.
The control panel consists of a digital temperature indicator cum controller, humidistat, indicators & On/Off switch. The seed germinator is supplied complete with SS perforated trays.
The instrument is designed to operate on 220V single Phase AC Supply.

Other sizes as per customer's requirement can also be manufactured.

Optional features

• Fully Automatic Microprocessor control
• Internal log memory to store the error states history for temperature and humidity with time and date.
• Remote machine monitoring and its operation through cell phone.
• In built serial Thermal printer (Both Text and graph mode).
• Low/High Voltage detection & safety cut off feature.
• Memory card log with 500MB memory.
• Temperature profile control consisting of 40 or more ramps.
• Touch screen control

PLANT GROWTH CHAMBER

Plant Growth Chamber is state-of-the-art equipment for plant growth and animal studies. It is used in many research, education and agricultural industries. The chamber is used for a material test in a constant climate, specifically the stability test in accordance with the ICH (International conference on halmonisation of technical requirements for registration of pharmaceuticals for Human use). The combination of technology for heating, cooling and dehumidifying, as applied by the carelabmed New Modular Plant Growth chamber is so far unique on the market. The inbuilt provision for light, temperature and humidity are made to test plant growth and analyse their flowering cycle.

Construction

The inner chamber is made of Stainless steel and the outer body is made of mild steel duly powder coated. A see through window is provided for inspection of plants without disturbing the thermal conditions. Adjustable stainless steel trays to place the samples are provided.

The inner stainless steel chamber is insulated by high density thick polyurethane foam insulation to prevent thermal losses.

The heating is done by finned heaters to maximize heat exchange process and to achieve the set temperature in a short time interval.

The cooling is done by a highly efficient hermetically sealed refrigeration unit with air cooled condenser & CFC free eco friendly refrigerant to achieve set temperature in a short time period.

Provision from 10,000Lux to 50,000Lux illumination is done with a mixture of incandescent lamp and fluorescent light to give effect of day light.

Highly efficient forced air type circulation with motor blower assembly is provided to maintain uniform temperature inside the chamber.

The new modular design of plant growth chamber is integrated with a multifunctional fuzzy controller with an integrated self diagnosis system and high quality platinum sensors. The fuzzy controller allows precise adjustments of temperature/humidity constellations, greater stability of the variables over long periods, which are of crucial significance.

• Temperature range 0°C to 70°C with a display and setting accuracy of 0.1°C.
• Over and under temperature protection temperature controller takes over control in case of failure of the primary controller. This controller can be set freely within the tolerance range for over and under temperature.
• Humidity range from 45% RH to 95%RH with a setting accuracy of 0.1%RH.
• A high grade PT-100 sensor for temperature measurement, capacitive sensor for humidity measurement is used for stable and long term transmission of measurement signals.
• Bright and large LCD to display all the set and the process parameters along with the visual messages.
• In built Real time Clock.
• In built programmable switching of fluorescent light.
• Visual & Audio Alarm in case of over /under temperature, humidity & empty water tank.
• On board RS-232 port for data acquisition.
• Programmable weekly timer.
• Minimum Power Consumption Algorithm:
  Even though the growth chamber consists of a high wattage heater to act to any settable temperature quickly but it uses only a fraction of heater wattage when the chamber temperature reaches near to the set temperature thereby saving a lot of energy. This is achieved by using the heating circuit with a thyristor in a current control mode driven through the microprocessor. This control provides a soft start for the heaters thereby prolongs the heater life.
• The menu is driven through the microprocessor with password protection to ensure that no manipulation can be done while operated by an un-authorized person.
• In built battery backup along with charger for display of the actual parameters.
• Data Retentive Timer for the processes ensures the incubation of material for the required time only.
• Feather touch keyboard for setting temperature, humidity and other parameters.

• 10CFT
• 20CFT
• 30CFT
• 45CFT
• 50CFT
• 60CFT

Other capacities as per customer's requirement are also available.

Optional Features

• Internal log memory to store the error states history for temperature and humidity with time and date.
• Remote machine monitoring and its operation through cell phone.
• In built serial Thermal printer (Both Text and graph mode).
• Low/High Voltage detection & safety cut off feature.
• Memory card log with 500MB memory.
• Temperature profile control consisting of 40 or more ramps.
• CO2 injection and control with a highly accurate dual beam IR sensor and solenoid valve control.
• Touch screen control

STABILITY TEST CHAMBER

M New Modular Design Stability test chamber is most versatile and highly reliable chamber ideal for stability & shell life test for drugs, its substances & various other products/devices for research and quality control examinations in pharmaceutical, food and cosmetics industries and biotechnology.

WATER BATH (SINGLE WALL)

The water bath is single walled, made of thick stainless steel complete with concentric rings. This water bath is used for evaporating liquids like alcohol or for melting solids such as agar. Concentric rings can be removed to accommodate containers of various sizes. The concentric rings are chrome plated. The temperature is controlled by capillary type thermostat from 5°C above ambient to 90°C.

Size(L X B X H)

WATER BATH (DOUBLE WALL)

double walled water bath is used for evaporating liquids like alcohol or for melting solids such as agar. The concentric rings can be removed to accommodate containers of various sizes. The water bath is double walled with the inner chamber made of Stainless Steel and outer wall made of thick mild steel sheet duly powder coated. The inner chamber is insulated from the outer atmosphere with special grade glass wool insulation. The concentric rings are chrome plated. The temperature is controlled by capillary thermostat from 5°C above ambient to 95°C.

The water bath is supplied complete with two indicator lamps, concentric rings, ON/OFF Switch, Cord & Plug but without thermometer. The water bath is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).

Size(L X B X H)

Optional Accessories

• Digital Temperature Controller cum Indicator.

SEROLOGICAL WATER BATH RECTANGULAR 

Serological Water baths are versatile enough to handle any clinical procedure, incubation, inactivation, agglutination, as well as most serological, pharmaceutical, biomedical procedures.

 Construction

Heating Elements

Temperature Control

Temperature is generally controlled by capillary type THERMOSTAT from ambient to 95°C ± 1°C. Temperature control knob is graduated in centigrade degrees.

 Control Panel

The equipment is provided with a panel having a thermostat control knob, ON/OFF switch, two pilot lamps, cord and plug.

Power Requirement

The water bath is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).

Size of inner chamber

Optional Accessories

HIGH PRECISION WATER BATH

high precision water bath is a table top model with double walled construction is ideally suited for experiments or research work requiring very precisely controlled temperature with an accuracy of 0.1°C of digital temp. Controller.

The inner chamber is made of thick stainless steel sheet & is 100% leak proof and the welding itself is ground properly to give a smooth inside working surface. The outer wall consists of thick mild steel sheet which is duly powder coated. The inner chamber is insulated from the outer atmosphere with high grade glass wool to ensure constant temperature and minimum loss of heat. 

It is provided with a glass window for an easy inside view. A speed controlled stirrer is provided for continuous stirring of the medium to ensure uniform temperature throughout. The heating mechanism comprises of sets of heaters corresponding to faster and slower heating. The later are meant for very precise control of temperature. The temperature is controlled from ambient to 100.0°C ± 0.2°C by a highly accurate microprocessor based PID temperature indicator cum controller.

The bath is designed to operate on 220V Single Phase AC Supply.

WATER BATH INCUBATOR SHAKER(METABOLIC)

This is a desktop model designed for studies on tissue metabolism, enzymes and protein coagulation or other experiments requiring shaking of subject matter at constant speed under controlled temperature environment.

The basic construction is double walled with 100% leak proof inner chamber of thick polished Stainless Steel sheet & has smooth inside working surface. The Outer body is made of mild steel duly powder coated. The lid made of thick polished Stainless Steel sheet prevent failing of condensed water droplets on the specimens. The space between the two walls is packed tightly with high grade glass wool to prevent loss of heat and ensure constant temperature. Heating is achieved by a high quality immersion type heater and temperature is controlled by capillary hydraulic type thermostat from ambient to 100°C ± 0.5° C. The shaking mechanism comprises of variable speed motor fixed on the left side and coupled to the shaking tray which shakes linearly to and fro on ball rollers moving in guides which are greased for smooth motion. 

KINEMATIC VISCOMETER BATH

 viscometer bath is a table top model with double walled construction is ideally suited for petroleum experiments or research work requiring very precisely controlled temperature with an accuracy of 0.1°C of digital temp. Controller.

The inner chamber is made of thick stainless steel sheet & is 100% leak proof and the welding itself is ground properly to give a smooth inside working surface. The bath shall consist of tuffened glass windows for inspection of the specimens. The outer wall consists of thick mild steel sheet which is duly powder coated. The inner chamber is insulated from the outer atmosphere with high grade glass wool to ensure constant temperature and minimum loss of heat.

A stirrer is provided for continuous stirring of the medium to ensure uniform temperature throughout. The heating mechanism comprises of sets of heaters corresponding to faster and slower heating. The later are meant for very precise control of temperature.
The temperature is controlled from ambient +5°C to 100.0°C ± 0.1°C by a highly accurate microprocessor based PID temperature indicator cum controller. The bath is designed to operate on 220V Single Phase AC Supply. Model with 110V also available.

REFRIGERATED SHAKER INCUBATOR 

floor model incubator shakers are designed for day-to-day laboratory routine work. Construction: The external body of the incubator is made of galvanized steel sheet with baked on finish having powder coating & the internal chamber is made of high-grade polished corrosion resistant double pane insulated stainless steel. The chamber is insulated with high density Polyurethane insulation to prevent thermal losses. The complete shaker is mounted on a heavy angle frame structure on all the sides & consists of castor wheels cum jack system for easy movement. A front opening door with glass window facilitates the inspection of samples without disturbing the temperature. The door consists of attachable light shielding plate for safety. The unit is provided with 02 Nos. removable stainless steel shelves. Forced air circulation inside ensures uniform temperature distribution throughout the chamber.

The shaker consists of triple eccentric drive mechanism with 25mm stroke displacement. A brushless induction motor along with a feed back signal provides accurate speed.

Heating is done by finned heaters (250 Watts) & are placed in the air flow duct.

The temperature range is from Ambient +5DegC to 80DegC controlled by a digital microprocessor temperature indicator cum controller within an accuracy & stability of ±0.5DegC. The heaters linked to the microprocessor run on the PID function. The temperature can be set in the inc./dec. of 0.1DegC. The shaking speed can be adjusted from 10 to 400RPM ±1RPM within increments of 1rpm & is controlled by the precise microprocessor controller. A bright digital LCD 7” multicolor touch screen displays & monitors all the set parameters including temperature, Speed & time (1min to 999hr). The operator can program multistep programming (4steps) in each program. Built in self-diagnostic system along with over & under voltage protection system switches off the system in case of fault. Built in automatic shaking speed adjustment in case of unbalanced load/vibrations/ shocks.

Independent alarm system (audio-visual) warns if the temperature deviates ±1DegC (adjustable) from the set point & speed varies ±2 rpm from the set speed (or even in stalled platform). An audio-visual alarm at the end of digital timing cycle is an added advantage. Bright LCD displays temperature, time & shaking speed digitally simultaneously on the same screen. The microprocessor controller is designed to retain parameters during power failure & restarts the unit automatically. Built in independent over temperature protection & cut off system. Built in data logging can be done with on board USB port by using a pen drive & the complete system can be remotely operated through a computer by using on board Ethernet port. An internal fluorescent light provides better visibility of samples. The chamber also consists of a built in rust free power socket for efficient operation.

The 100 Ltr capacity chamber consists of 18”X18” universal platform to hold various spring based clamps. The platforms can be interchanged easily as per the operator’s requirement.

The shaker also has a static incubation shelf facility for incubation of petri plates apart from the shaking & is provided with 2 shelves. Stainless steel clamps to hold various flask sizes 50mL, 100mL, 250mL, 500mL, 1Ltr. are provided along with the machine.

The instrument is designed to operate on 220V Single Phase AC Supply with over current protection system.

Accessories: Voltage Stabilizer of suitable rating

SHAKER INCUBATOR

floor model incubator shakers are designed for day-to-day laboratory routine work. Construction: The external body of the incubator is made of galvanized steel sheet with baked on finish having powder coating & the internal chamber is made of high-grade polished corrosion resistant double pane insulated stainless steel. The chamber is insulated with high density Polyurethane insulation to prevent thermal losses. The complete shaker is mounted on a heavy angle frame structure on all the sides & consists of castor wheels cum jack system for easy movement. A front opening door with glass window facilitates the inspection of samples without disturbing the temperature. The door consists of attachable light shielding plate for safety. The unit is provided with 02 Nos. removable stainless steel shelves. Forced air circulation inside ensures uniform temperature distribution throughout the chamber.

The shaker consists of triple eccentric drive mechanism with 25mm stroke displacement. A brushless induction motor along with a feed back signal provides accurate speed.

Heating is done by finned heaters (250 Watts) & are placed in the air flow duct.

The temperature range is from Ambient +5DegC to 80DegC controlled by a digital microprocessor temperature indicator cum controller within an accuracy & stability of ±0.5DegC. The heaters linked to the microprocessor run on the PID function. The temperature can be set in the inc./dec. of 0.1DegC. The shaking speed can be adjusted from 10 to 400RPM ±1RPM within increments of 1rpm & is controlled by the precise microprocessor controller. A bright digital LCD 7” multicolor touch screen displays & monitors all the set parameters including temperature, Speed & time (1min to 999hr). The operator can program multistep programming (4steps) in each program. Built in self-diagnostic system along with over & under voltage protection system switches off the system in case of fault. Built in automatic shaking speed adjustment in case of unbalanced load/vibrations/ shocks.

Independent alarm system (audio-visual) warns if the temperature deviates ±1DegC (adjustable) from the set point & speed varies ±2 rpm from the set speed (or even in stalled platform). An audio-visual alarm at the end of digital timing cycle is an added advantage. Bright LCD displays temperature, time & shaking speed digitally simultaneously on the same screen. The microprocessor controller is designed to retain parameters during power failure & restarts the unit automatically. Built in independent over temperature protection & cut off system. Built in data logging can be done with on board USB port by using a pen drive & the complete system can be remotely operated through a computer by using on board Ethernet port. An internal fluorescent light provides better visibility of samples. The chamber also consists of a built in rust free power socket for efficient operation.

The 100 Ltr capacity chamber consists of 18”X18” universal platform to hold various spring based clamps. The platforms can be interchanged easily as per the operator’s requirement.

The shaker also has a static incubation shelf facility for incubation of petri plates apart from the shaking & is provided with 2 shelves. Stainless steel clamps to hold various flask sizes 50mL, 100mL, 250mL, 500mL, 1Ltr. are provided along with the machine.

The instrument is designed to operate on 220V Single Phase AC Supply with over current protection system.

Accessories: Voltage Stabilizer of suitable rating

LABORATORY COIL TYPE HEATING PLATE

The Body is made of P.C.R.C. sheet duly powder coated. The heating plate is fitted with coil type heating element. The heating plate will be powder coated. 

The instrument is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).

LABORATORY ROUND HEATING PLATE

The outer body is made of perforated P.C.R.C sheet duly powder coated and fitted with coil type heating element. The top plate is 20.5 cm. dia fitted with and indicating lamp. This type of hot plate is used for heating up to 350°C. 

The hot plate is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).

LABORATORY RECTANGULAR HEATING PLATE

This type of rectangular heating plate is used for continuous heating up to 350°C. The body is made of P.C.R.C sheet duly powder coated. The top rectangular cast iron plate has insulated elements.

The hot plate is designed to operate on 220V AC supply (Model with 110V supply are also available).

VORTEX SHAKER

It is useful for rapidly mixing/agitating solution in test tubes. The vibrating neoprene rubber cup accommodates a variety of sizes of test tube/flasks. 

Short, rapid, eccentric stroke, motor driven Neoprene cup imparts vigorous agitation to tubes or small flask held in or against it. The shaker is particularly efficient for dislodging sediments from tips of centrifuge tubes. The housing is 150 × 150mm approx. The Vacuum Rubber pads are provided at bottom. Machine supplied with complete with speed control, cord and ON/OFF switch and indicator to work on 220V, Single phase, 50 Hz. AC supply.

VORTEX SHAKER (TOUCH TYPE)

It is useful for rapidly mixing/agitating solution in test tubes. The vibrating neoprene rubber cup accommodates a variety of sizes of test tube/flasks. 

Short, rapid, eccentric stroke, motor driven Neoprene cup imparts vigorous agitation to tubes or small flask held in or against it. The shaker is particularly efficient for dislodging sediments from tips of centrifuge tubes. The housing is 150 × 150mm approx. The Vacuum Rubber pads are provided at bottom. Machine supplied with complete with speed control, cord and ON/OFF switch and indicator to work on 220V, Single phase, 50 Hz. AC supply.

This model is provided with touch type On/Off Switch.

ROTARY SHAKER (HORIZONTAL & FIXED SPEED)

For shaking solution in glass flasks in Research Institutions, Workshops, Chemical & Agriculture Laboratories. It is a compact bench model unit. The heavy platform is fitted with rubber discs to hold Erlen Meyer Flasks from 50 mL to 1000 mL capacity. The platform is mounted on ball bearing crank shafts to give an orbital circular motion to flasks. The diameter of the orbit is approximately 2". The entire assembly is mounted on a rental casing which houses a motor coupled by means of V Belt with pitch pulley. The motor supplied is of standard make. Working on 22O volts, single phase, 50 cycles AC supply.

Available in following capacities

ROTARY SHAKER (CONTINUOUS RATING WITH SPEED CONTROLLER)

For shaking solution in glass flasks in Research Institutions, Workshops, Chemical & Agriculture Laboratories. It is a compact bench model unit. The heavy platform is fitted with rubber discs to hold Erlen Meyer Flasks from 50 mL to 1000 mL capacity. The platform is mounted on ball bearing crank shafts to give an orbital circular motion to flasks. The diameter of the orbit is approximately 2". The entire assembly is mounted on a rental casing which houses a motor coupled by means of V Belt with pitch pulley. The motor supplied is of standard make. Working on 22O volts, single phase, 50 cycles AC supply. This is provided with a speed control regulator to adjust speed from 50-250RPM.

Available in following capacities

SHAKING MACHINE (WRIST ACTION SHAKER)

Wrist Action Shaker is a rugged construction, heavy base, rated for continuous use. The shaking speed action is variable. The degree of agitation, gentle to violent, is controlled by speed regulator. The Erlen Meyer flasks from 100 to 1000 mL capacity can be shaken at one time even without balancing. The full torque is always applied to oscillating mechanism irrespective of speed setting. Fitted with fraction H.P. motor, cord and plug to work on 220 Volts, Single Phase, 50 Hz, AC supply.