CLM-3700	Laboratory Air Compressor 8 bar - 25 L, 220-240 V 50-60 Hz
CLM-3705	Laboratory Air Compressor 8 bar - 50 L, 220-240 V 50-60 Hz
CLM-3710	Laboratory Air Compressor 10 bar - 100 L, 220 V 50 Hz

CLM series Laboratory Air Compressors are durable machines for supplying compressed air

required by several analyses in material testing.

The CLM-3700 is supplied complete with

• Air Gun

• Hose

	Voltage	Dimensions	Weight (approx)
CLM-3700	220-240 V 50-60 Hz	600x300x600 mm	28.5 kg
CLM-3705	220-240 V 50-60 Hz	600x300x600 mm	40 kg
CLM-3710	220-240 V 50-60 Hz	1460x470x860 mm	140 kg

	Motor Power	Tank Capacity	Air Suction Capacity	Max. Working Pressure
CLM-3700	2 HP	25 L	192 L/min	8 bar
CLM-3705	2 HP	50 L	192 L/min	8 bar
CLM-3710	2 HP	100 L	250 L/min	10 bar

Product Enquiry

AUTOMATIC FLEXURAL TESTING MACHINE

Product code

CLM-5540	200 kn automatic flexural testing machine,220-240 v 50-60 hz
CLM-5540/110	200 kn automatic flexural testing machine,110 v 60 hz
CLM-5542	300 kn automatic flexural testing machine,c type,220-240 v 50-60 hz
CLM-5542/110	300 kn automatic flexural testing machine,c type,110 v 60 hz
CLM-5544	300 kn automatic flexural testing machine 220-240 v 50-60 hz

Standards

EN 1338, 1339, 1340, 12390-5, 12390-6; BS 1881; ASTM C78, C293, C496

The CLM automatic range of 200 kn,300 kn and capacity flexure testing machines have been designed for reliable and consistent testing of flexural test on standard concrete beams,concrete or natural stone kerbs, concrete paving flags, and natural stone slabs and tensile splitting test of concrete paving blocks. These flexural testing machines are the result of continuous research to upgrade the testing machines with latest technologies to conform to the latest standards EN 12390-5, EN 12390-6, EN 1340, BS 1881, ASTM C78, and C293 AND C 496 in terms of its technical properties talking into account client requirements. These also meet the requirements of CE norms for health and safety of the operator.

Tests can be performed by either on BS 100 unit or on a computer with using free CLM software. The advantage of performing tests on computer with using CLM software, such as reporting,graphical output, etc.

The CLM automatic range of 200 kn, 300 kn and 600 kn capacity flexure testing testing machine is switched on and specimen is placed, then the only required operations are:

• Setting test parameters, including pace rate only required when the specimen type is changed.

• Pressing the START button on the control unit.

• The machine automatically starts the rapid approach; switches the test speed after

1% of the load capacity of the machine and stops once the specimen failure.

• Automatically saves the test parameters and test results

The CLM range of flexural machines have the accuracy of class 1 starting from 2% of the full capacity.

The flexure testing machines are consists of heavy duty welded frame,automatic hydraulic power pack with data acquisition and control system BC 100.

Flextural test assemblies should be ordered seperately.

Safety features

Maximum pressure valves to avoid machine overloading
piston travel limit switch
Emergency stop button
Software controlled maximum load valve

		CLM-5540
Capacity		200 kn
Class 1 range		4-200 kn
Resolution		1/65.000
Ram Travel		100 mm
Max.Vertical Clearance		425 mm(without accessories)
Max.Horizontal Clearance		650 mm
Max.Clearance between lower rollers		900 mm
Frame		CLM-5600
Power Pack		CLM-4830
Overall	Frame	1000x950x1130 mm
Dimensions	Power pack	370x400x920
Weight	Frame	225 kg
(Approx.)	Power pack	85 kg

		CLM-5542
Capacity		300 kn
Class 1 range		6-300 kn
Resolution		1/65.000
Ram Travel		120 mm
Max.vertical Clearance		425 mm (without accessories)
Max.horizontal Clearance		640 mm
Max.clearance between lower rollers		900 mm
Max.clearance between the center of the piston to the side of the frame		320 mm
Frame		CLM-5700
Power pack		CLM-4830
overall Dimensions	frame	1000x900x1250 mm
	Power pack	370x400x920
Weight (Approx.)	Frame	555 kg
	power pack	85 kg

		CLM-5544
Capacity		600 kn
Class 1 range		12-6000 kn
Resolution		1/65.000
Ram Travel		350 mm
Max.vertical Clearance		930 mm (without accessories)
Max.horizontal Clearance		640 mm
Max.clearance between lower rollers		2000 mm
Frame		CLM-5800
Power pack		CLM-4830
overall Dimensions	frame	1100x2000x2650 mm
	Power pack	370x400x920
Weight (approx.)	frame	2750 kg
	Power Pack	85 kg

BC 100 Unit

BC 100 TFT unit is designed to control the machine and processing of data from load-cells, pressure transducers or displacement transducers.

All the operations of BC 100 are controlled from the front panel consisting of a 800x480 pixel 65535 color resistive touch screen display and function keys. The unit can be configured as using for two frames or one frame with three displacement transducers.

BC 100 has easy to use menu options. it displays all menu option listings simultaneously, allowing the operator to access the required option in a seamless manner to activate the option or enter a numeric value to set the test parameters.its specimen setting sub-menu lists different specimen types including but not limited to cube,cylinder,block,beam,beam double upper bearers,cube splitting tensile and kerb flexure.the BC 100 digital graphic display is able to Draw real-time "load vs.time" or "stress vs.time" graphics.

BC 100 unit offers many addition unique features.you can save more than 10000 test results in its internal memory.BC 100 unit has support for various off-the-shelf USB printers,supporting both inkjet and laser printers.thanks to its built-in internet protocol suite,every aspect of BC 100 device can be controlled remotely from anywhere around the world.last but not the least, BC100 has support for Android tablets permitting to control and monitor your testing equipment remotely.

Main Features

• Pace rate control from 1 kN/sec to 25 kN/sec For concrete or 50 kN/sec to 2,4 kN/sec

for cement.

• Can control 2 frames

• Can make test with load control.

• Real time display of test graph.

• CPU card with 32-bit ARM RISC architecture

• Permanent storage capacity up to 10000 test results

• 4 analog channels for different frame load cells or pressure transducers

• Programmable digital gain adjustment for load-cell, pressure transducers,

strain gaugebased sensors, potentiometric sensors, voltage and current transmitters

• 1/256000 points resolution per channel

• 10 data per second sample rate for each channel

• Ethernet connecting for computer interface

• 800x480 resolution 65535 color TFT-LCD industrial touchscreen

• 4 main function keys

• Multi-language support

• 3 different unit system selection; kN, ton and lbf

• Real-time clock and date

• Test result visualization and memory management interface

• Remote connection from through ethernet and bluetooth

• USB flash disc for importing test results and for firmware

• USB printer support inkjet and laser printers (ask for compatible models)

• Camera support for real-time video recording during test (ask for compatible models)

• Free of charge PC software for the test control and advanced report generation

Safety Features

• Maximum pressure valves to avoid machine overloading

• Piston travel limit switch

• Emergency stop button

• Software controlled maximum load value

Data Acquisition & Control PC Software

The Automatic Compression machine can be controlled (Start , Stop commands) by a computer with the software (given free of charge by CLM).

This software provides data acquisition and management for compression, flexure and splitting tensile test throughout the test execution.

The advanced functions for data base management provide an easy navigation of all saved data.The test results certificate includes all descriptive information.

Therefore, test parameters can be set and details about the test carried out such as client details, test type, specimen type, user info and other information required can be entered and printed out as well as test report and graph.

Following tests can be done with the CLM software.

Standard Code	Description
EN 12390-3	Compressive Strength of Concrete Cylinders or Cubes
EN 12390-5	Flexural Strength of Concrete Beams
EN 1340	Flexural Strength of Concrete Kerbs
EN 12390-6	Tensile Splitting Strength of Concrete Cylinders or Cubes
EN 1338	Tensile Splitting Strength of Concrete Paving Blocks
EN 772-1	Compressive Strength of Clay Masonry Units
EN 772-1	Compressive Strength of Dense and Light Concrete Masonry Units
EN 13748-1	Breaking Strength/Load of Terrazzo Tiles for Internal Use
EN 13748-2	Breaking Strength/Load of Terrazzo Tiles for External Use
EN 538 and EN 491	Flexural Strength of Clay or Concrete Roofing Tiles
EN 196-1	Compressive Strength of Hydraulic-Cement Mortars
EN 196-1	Flexural Strength of Hydraulic-Cement Mortars
EN 12504-1 and EN 12390-3	Compressive Strength of Cored Concrete Specimens

• Foreign Language Support and Customizable User Interface

All contents of experimental data and additional information can be organized byuser.

Software can be performed in x different languages.

• Capability to Save 24 test results of different specimens in one test folder

Test results, graphics and properties of 24 different specimens can be saved in one folder.

Old test folders can be reviewed and be edited easily. Advanced Graphic User

Interface Software.

• Graphical data on the screen is refreshed simultaneously during test procedure

Load values can be monitored in high resolution graphics at every 100 milliseconds.

User can highlight all 24 different specimen curves or preferred ones in different colors on the graphics.

Zooming in–out and dragging can be done easily by mouse.

Peak valuesof curves can be marked on the graphics and user can get load value of any point on the graph via high resolution.

• Able to save frequently used texts in memory and recall them when necessary

Frequently used information like name and location of the laboratory, type and dimensions of mostly used specimens are held in memory and can be written automatically by right clicking on information boxes and selecting frequently used text in menu.

• Capable to Access and use previously done test data

User can access any data of previously completed tests and use in his/ her new report since most of the tests have same structure and properties.

• Able to edit test parameters of the testing equipment through Software

All test parameters supported by testing equipment can be changed remotely via software.

All test parameters specified by user are downloaded to the device before initialing the test procedure.

By this way predefined device parameters will not cause errors in test results.

• Graphical outputs and reports can be saved as a MS Excel worksheet

Test result parameters and graphics are transferred to MS Excel worksheet properly to give user a chance to edit any data and graph easily.

• Maximum Flexibility to edit report and graph templates

User can design his/her custom report template and graphic scheme in MS Excel. In software part, user will define which data will be screened in which cell on the worksheet. Therefore, he/she will be able to monitor test results in his/her specific design.

Product Enquiry

AUTOMATIC SOIL COMPACTOR

Product code

CLM-0620	Automatic soil compactor, 220-240 v 50 Hz (60 Hz version is available upon request)
CLM-0620/110	Automatic soil compactor, 110 v 60 Hz
CLM-0622	ASTM/EN/BS Rammer For CLM-0620
CLM-0624	ASTM Remmer Face 0 50.8 mm for clm-0620
CLM-0625	EN/BS Rammer face 0 50 mm for clm-0620

Standards

ASTM, D558, D559,D560,d698, dD1557, D1883;EN 13286 2, 13286-47;BS 1377:4 AASHTO T99, T134, T135, T136, T180, T193; NLT 1o7/98, 108/91, 111/87

CLM-0620 automatic soil compacter is designed to compact specimens automatically and uniformly, assuring conformity with the above listed international standards.

The principle of the design is to allow the hammer to drop the required height into the soil in the moult which rotates circularly to distribute the blows uniformly over the surface of the specimen in the mound. the drop height is adjustable to 300 mm, 305 mm,450 mm and 457 mm. the rammer is circular faced and interchangeable to 50.8 mm diameter. rammer weight is adjustable to 2.5 kg or 4.5 kg according to reference standard. when compacting 100 mm diameter specimens the unit operates on a single radius and when compacting 150 mm diameter specimens the unit operates on iner and outer radius to obtain even compaction.

The number of blows per layer can be set at the beginning of the compaction process by the digital counter accprding to the standard preferred by user. this automatic blow patten ensures effective and equal compaction for each layer of soil by rotating the base table, so the mould, in equal step and travelling the rammer across the mould. user defined blow number and in-out distribution is also available.

compactor is equipped with programmable digital counter which allows the machine;

To select reference standard (number of blows and mound size ) by the operator at the beginning of the test.

To set desired compaction cycle ( number of blows and count of the number of inner and outer drops) by user.

Rammers

EN / BS

Circular faced, 50 mm dia.

Adjustable to 2.5 or 4.54 kg weight

ASTM

Circular faced, 50.8 mm dia.

Adjustable to 2.5 kg or 4.54 kg weight

Drop Height

Adjustable to 300 mm or 450 mm

ASTM/AASHTO/EN

Adjustable to 305 mm or 457 mm

The automatic soil compactor is supplied complete with:

ASTM/EN/BS Rammer
ASTM Rammer face, Ø 50.8 mm.
EN/BS Rammer face, Ø 50 mm

Product Enquiry

CALIBRATION ANVIL

Product Code

CLM-3030

Concrete Test Hammer (Schmidt Hammer) N Type

CLM-3040

Calibration Anvil

Standards

EN 12504-2, 13791; ASTM C 805; BS 1881:202; NF P18-417;

DIN 1048; UNI 9189

CLM-3030 Concrete Test Hammer is used for the non-destructive testing of the surface of hardened concrete in order to evaluate the strength in various parts of a structure.

The concrete hammer is supplied complete with plastic carrying case, grinding stone and instruction manual.

CLM-3040 Calibration Anvil, manufactured from a special steel alloy, is used for the Calibration of concrete test hammers.

Product Code	Dimensions	Weight (approx.)
CLM-3030	80x80x360 mm	1,5 kg
CLM-3040	150x150x230 mm	16 kg

Measuring Range	10–70 N/mm²
Impact Energy	2.207 Nm

Product Enquiry

CONCRETE MOULDS

Product code

CLM-0810	Cube mould 100 mm, cast iron
CLM-0812	Cube mould 100 mm, Two gang Plastic
CLM-0815	Cube mould 150 mm, Cast iron
CLM-0820	Cube mould 150 mm, Plastic
CLM-0821	Cube mould 150 mm,high Quality Plastic
CLM-0825	Cube mould 200 mm, Cast Iron

Standards

EN 12390-1

Cast iron and hard plastic mould are manufactured in Accordance with diamensions and tolerance stated in the relevent standard, four part body and attached to the base with a robust clamp, the cast iron moulds are designed to be durable, corrosion resistant and easy to clean.

CLM-0820 plastic moulds manufactured from robust plastic are one piece and easy for field use, the specimens are ejected from the moulds by compressed air.

Product code	Dimensions	Weight (approx.)
CLM-0810	270x270x120 mm	9 kg
CLM-0812	260x120x120 mm	2 kg
CLM-0815	300x210x160 mm	17 kg
CLM-0820	220X220X180 mm	2 kg
CLM-0821	220X220X180 mm	2 kg
CLM-0825	332X270X223 mm	22 kg

Product Enquiry

CONCRETE TEST HAMMER

Product code

CLM-3028

Concrete test hammer (Schmidt hammer) N Type (CLM)

CLM-3040

Calibration anvil

Standard

EN 12504-2, 13791; ASTM C 805; BS 1881:202; NF

P18-417; DIN 1048; UNI 9189

The quality of concrete is mainly judged by its compressive strength directly affecting the

load-bearing capacity and durability of concrete structures.

CLM-3028 Concrete test hammer (Schmidt hammer N type CLM is used to measure the compressive strength characteristics of hardened concrete non-destructively, control uniform concrete quality and detect weak spots in the concrete. the test object should have a minimum thickness of 100 mm(3.9 in).

CLM-3040 Calibration Anvil, manufactured from a special steel alloy, is used for the calibration of concrete test hammers.

Product code	Dimensions	Weight (approx.)
CLM-3028	340x120x120 mm	2 kg
CLM-3040	150x150x230 mm	16 kg

Measuring Range	10-70 N/mm²
Impact Energy	2.207 Nm

Product Enquiry

CONSOLIDATION

Product Code

CLM-0300	Front Loading Oedometer (Consolidation)
CLM-0302	Bench for Consolidation, 3 Oedometer Capacity
CLM-0307	Consolidation Cell for High Pressure, Ø 50 mm
CLM-0309	Consolidation Cell for High Pressure, A STM Ø 63.5 mm (2.5”)
CLM-0313	Consolidation Cell for High Pressure, B S/EN, Ø 75 mm
CLM-0317	Consolidation Cell for High Pressure, Ø 101,6 mm (4").
CLM-0321	Consolidation Cell for High Pressure, Ø112,8 mm
CLM-0120	Analog Dial Gauge, 30x0.01 mm
CLM-0148	Digital Dial Gauge 25x0.01 mm, LCD display
CLM-0152	Digital Dial Gauge 12.7x0.001 mm, LCD display
CLM-0060	Linear Potentiometric Displacement T ransducer, 10x0,001mm
CLM-0062	Linear Potentiometric Displacement T ransducer, 25x0,001mm
CLM-0072	High Accurate Strain Gauge Based D isplacement Transducer, 10x0,001 mm
CLM-0078	High Accurate Strain Gauge Based Displacement Transducer, 50x0,001 mm
CLM-0320	Static Unilogger, 4 Channel Data Acquisition Unit
CLM-0325	Static Unilogger, 8 Channel Data Acquisition Unit
CLM-0300	Utest Software for Consolidation Test

Product Name	CLM-0307 (Ø 50 m)	CLM-0309 Ø 63,5mm (2,5")	CLM-0313 (Ø 75m)	CLM-0317 Ø101,6mm (4")	CLM-0321 Ø112,8mm
Upper and Lower Porous Disc	CLM-0330	CLM-0332	CLM-0334	CLM-0336	CLM-0338
Spare Cutting Ring	CLM-0308	CLM-0312	CLM-0314	CLM-0318	CLM-0322
Calibration Disc, stainless steel	CLM-0344	CLM-0346	CLM-0348	CLM-0350	CLM-0352
Apparatus for Prepare Cons. Sample	CLM-0356	CLM-0358	CLM-0360	CLM-0362	CLM-0364

Standards

BS 1377:5; ASTM D2435, D3877, D4546; AASHTO T216; CEN ISO/TS 17892-5

The CLM-0300 Front Loading Oedometer is rigidly constructed toensure minimum frame distortion. The frame is designed to load the specimen through a lever arm assembly and one of three alternative beam ratios as 9:1, 10:1 and 11:1. The beam is fitted with a counter balance weight and beam support jack. The cell platform will accept the complete range CLM consolidation cells and is fitted with a central spigot to ensure accuratecentering of the cell under the loading.

The CLM fixed ring consolidation cells are manufactured from corrosion-resistant materials and conform to the requirements of the relevant standards. An integral water reservoir is incorporated in the cell which allows the specimen to be inundated when required. All cells are supplied complete with upper and lower porous disc, pressure pad and cutting (specimen) ring.

The One-dimensional Consolidation test is used to determine the consolidation characteristics of soils of low permeability.

Tests are carried out on specimens prepared from undisturbed samples. Data obtained from these tests together with classification data and a knowledge of the soils loading history, enables estimates to be made of the behavior of foundations under load.Consolidation cell, dial gauge or displacement transducer and data logger, bench, weights, apparatuses for prepare Consolidation samples and calibration disc should be ordered separately.

Data Acquisition & PC Software

High resolution : 260.000 points.
Serial port for PC and printer connection.
CPU card by microprocessor 32 bit ARM risk architecture
4 or 8 analogical channels for displacement transducers.

The CLM consolidation software is developed according to ASTM D2435, D3877, D4546, BS 1377:5 and AASHTO T216 standarts to use with static unilogger systems. The displacement transducers are connected to unilogger and unilooger is connected to PC by RS232 serial output. The software is capable monitoring the chance of displacement data over times. The user can start recording of vertical displacement and stop current recording proses. The user can enter time intervals(or select fixed time intervals) and stress for calculattion consolidation test data.

The consolidation software have 8 different columns which can be set to different normal load values. The user can also manually enter the vertical displacement to these columns. The timedisplacement pairs are drawn to square root time and logaritmic time graphs.

The software can calculate enginnering terms like as square root T90, T50, T100, MV, CV. These calculations are done respect to the standarts requirements by using best line algorithms.Since these parameters require an engineering perspective while making comments, all test data and graphs are exported to Microsoft Excel for further investigations.

• Foreign Language Support and Customizable User Interface

• Graphical outputs and reports can be saved as a MS Excel worksheet

• Maximum Flexibility to edit report and graph templates.

Dimensions	750x850x1400 mm ( 3pcsUTS-0300 + CLM-302+UTS-0348 +Accessories )
Weight (approx.)	180 kg ( 3pcs UTS-0300 + UTS-302 + CLM-0348 +Accessories )

Sets of Weight for Consolidation

CLM-0368	16 kgf Set	2) 5 kg, (1) 2 kg, (2) 1 kg, (3) 0,5 kg, (2) 0,25 kg
CLM-0370	32 kgf Set	(1) 10 kg, (3) 5 kg, (2) 2 kg, (1) 1 kg, (3) 0,5 kg, (2) 0,25
CLM-0372	50 kgf Set	(3) 10 kg, (2) 5 kg, (3) 2 kg, (2) 1 kg, (3) 0,5 kg, (2) 0,25
CLM-0374	64 kgf Set	(4) 10 kg, (3) 5 kg, (2) 2 kg, (3) 1 kg, (3) 0,5 kg, (2) 0,25
CLM-0376	80 kgf Set	(6) 10 kg, (2) 5 kg, (3) 2 kg, (2) 1 kg, (3) 0,5 kg, (2) 0,25

Code	Slotted Weight
CLM-0380	125 g
CLM-0382	250 g
CLM-0384	500 g
CLM-0386	1 kg
CLM-0388	2 kg
CLM-0390	5 kg
CLM-0392	10 kg
CLM-0394	4 kg
CLM-0396	8 kg

Product Enquiry

CRUSHING VALUE

Product Code

CLM-0630	Aggregate crushing value (ACV) SET 150 mm BS
CLM-0631	Aggregate crushing value cylinder 150 mm for CLM-630
CLM-0632	Aggregate crushing value base plate for CLM-630
CLM-0633	Aggregate crushing value plunger for CLM-630
CLM- 0634	Aggregate crushing value cylindrical measure for CLM-630
CLM-0408	Tamping rod 16x600 mm
CLM-0640	Aggregate crushing value (ACE) SET 75 MM 85
CLM-0641	Aggeregate crushing value cylinder 75 mm for CLM-640
CLM-0642	Aggregate crushing calue base plate for CLM-640
CLM-0643	Aggregate crushing value plunger for CLM-640
CLM-0644	Aggregate crushing value cylindrical measure for CLM-640
CLM-0645	Tamping rod 8x300 mm

Standards

BS 812:110,812-111

The Aggregate crushing value (ACV) the set provides a relative measure of the resistance of an aggregate to crushing under a graduatly applied compressive load.each set consists of steel cylinder, plunger, base plate, cylindrical measure and tamping rod, all parts of the appartus are power coated or galvanized steel, heat treated and ground before manufacturing to make it durable and reliable for aggregate smaller than 10 mm, a 75 mm diameter cylinder and associated is available.

CLM-0630 and CLM-0640 test set are used for the ten percent fines value (TFV) of aggregates according to BS 812:111.

The Aggregate crushing value (ACV) set is supplied complete with:

Cylinder,
Base Plate,
Plunger,
Cylindrical Measure,
Tamping Rod,

	CLM-0630	CLM-0640
Dimensions	250X250X600 MM	120X120X350 MM
Weight (approx.)	29 kg	6 kg

Product Enquiry

DEEP SCANNING METAL LOCATOR

Product Code

CLM-3015

Deep Scanning Metal Locator

CLM-3015 Deep scanning metal locator is find rebar and metalic pipes, conduit, metel studs, junction boxes and metal framing up to 150 mm deep by scanning through most nonmetallic construction material including solid concrete.

It scans through solid concrete and pinpoints the location and depth of target and differentiates between steel rebar and copper pipe.

Technical Specifications

Battery	9 V alkaline
Position Accuracy	Rebar/copper pipe 14 mm dia,at a minimum grid spacing of 152 mm are located typically within 13 mm depth
Depth	Up to 152+25 mm
Water Resistance	Splash and water resistance but not water proof

Dimensions

251x109x63

Weight (approx.)

320 g (incl,battery)

Product Enquiry

DENSITY WATER CONTENT RELATIONSHIP

product code

CLM-0600	Standard Proctor Mould, ASTM
CLM-0602	Standard Proctor Compaction Rammer, ASTM
CLM-0604	Modified Proctor Mould, ASTM
CLM-0606	Modified Proctor Compaction Remmer, ASTM
CLM-0608	A Type Proctor Mould (Standard), EN
CLM-0608/1	Steel Plate For The End Layer Compaction For CLM-0608, EN
CLM-0610	A Type Proctor Compaction Remmer (low energy-standard ), EN
CLM-0612	B Type Proctor Compacttion Mould (modified ), EN
CLM-0612/1	Steel Plate For The End Layer Compaction For CLM-0612, EN
CLM-0614	B Type Proctor Compaction Remmer (medium enegy-modified), EN
CLM-0615	1 Liter Mould (standard proctor), BS, TS 1900-1CLM-0616
CLM-0616	2.5 kg Compaction Remmer,BS
CLM-0750	CBR Type Mould, BS (modified proctor) /vibrating Hammer Mould, BS, EN, TS 1900-1
CLM-0618	4.5 kg Compaction Remmer,BS

Standards

ASTM D 698, D 1557, D 558 ; AASHTO T 99, T180, T 134 ; EN 12386-2, 13286-4

BS 1377:4,1924:2

Moulds and rammers are used for determining the relationship between the moisture content and density of compacted soil. Made of Plated steel, includes collar, mould body and base plate. Rammers are used to compact the soil sample in the Proctor Moulds and made of plated steel. Different models are available conforming to the relevant standards.

Proctor Moulds - ASTM / AASHTO

Product Code	Description	Internal Dia. (mm)	Body Height (mm)	Volume (cm3)	Weight (approx. kg)
CLM-0600	Standard Proctor Mould	101.6 ± 0.4	116.4 ± 0.5	944.0 ± 14	7
CLM-0604	Modified Proctor Mould	152.4 ± 0.7	116.4 ± 0.5	2124 ± 25	9

Proctor Moulds – EN

Product Code	Description	Internal Dia.(mm)	Body Height (mm)	Volume (cm3)	Weight (approx. kg)
CLM-0608	A Type Proctor Mould EN(Standard)	100 ± 1	120± 1	942	5
CLM-0612	B Type Proctor Mould EN(Modified)	150 ± 1	120 ± 1	2120	8.9

Proctor Moulds – BS

Product Code

Description

Internal Dia.(mm)

Body Height (mm)

Volume(cm3)

Weight(approx.kg)

CLM-0615

1liter Mould (Standard Proctor) BS,TS-1900-1

105 ± 0.5

115,5± 0,5

1000

CLM-0750

CBR Type Mould BS (Modified Proctor)

/ Vibrating Hammer Mould BS, EN, TS-1900-1

152 ± 0.5

127 ± 1

2303

7.3

Proctor Rammers - ASTM / AASHTO

Product Code	Description	Rammer Dia. (mm)	Free Fall Height (mm)	Mass of Rammer (g)	Weight (approx. kg)
CLM-0602	Standard Proctor Compaction Rammer	50.8	304.8± 1	2495 ± 23	4.5
CLM-0606	Modified Proctor Compaction Rammer	50.8	457 ± 1.3	4540 ± 10	8

Proctor Rammers – EN

Product Code	Description	Rammer Dia. (mm)	Free Fall Height (mm)	Mass of Rammer (g)	Weight (approx. kg)
CLM-0610	A Type Rammer EN (Low Energy-Standard)	50 ± 0.5	305± 3	2500 ± 20	4.5
CLM-0614	B Type Rammer EN (Medium Energy-Modified)	50 ± 0.5	457 ± 3	4500 ± 40	8

Proctor Rammers – BS

Product Code	Description	Rammer Dia. (mm)	Free Fall Height (mm)	Mass of Rammer (g)	Weight (approx. kg)
CLM-0616	2.5 kg Compaction Rammer BS	50 ± 0.5	300± 3	2500 ± 25	4.5
CLM-0618	4.5 kg Compaction Rammer BS	50 ± 0.5	450 ± 4	4500 ± 50	8

Product Enquiry

DIGITAL BALANCES

Product code

CLM-0633	Digital Balance 600 g x 0.01 g
CLM-0635	Digital Balance 6 kg x 0.1 g
CLM-0637	Digital Balance 30 kg x 5 kg
CLM-0638	Digital Balance 30 kg x 0.5 g
CLM-0640	Digital Balance 3000 g x 0.01 g
CLM-0642	Digital Balance 3500 g x 0.01 g
CLM-0645	Digital Balance 15 kg x 0.2 g
CLM-0648	Digital Balance 30 kg x 0.1 g
CLM-0654	Digital Balance 60 kg x 1 g

The Carelabmed Series Digital Balance provide a range of maximum Capacity and readability characteristics which make them economical and Easy to use, they are ideal for central and side laboratories who require a Range of balances for various applications.

The Carelabmed Series Digital Balance are fitted with strain gauze load cell and are designed with large backlit LCD displays that give precise measurements within the 0?c to 40?c temperature range. Digital Balances have internal automatic calibration future. All model can be connected to printers or PCs through their RS 232 outputs and are supplied with 220 – 240, 50-60 Hz AC/DC adapters.

	Capacity	Readability	Pan size (mm)	Additional Power supply
CLM-O633	600 g	0.01 kg	Ø 116	AC Battery
CLM-0635	6 kg	0.1 kg	300 x 230	Rechargeable Batt.
CLM-0637	30 kg	5 g	300 x 230	Rechargeable Batt.
CLM-0638	30 kg	0.5 g	300 x 230	Rechargeable Batt.
CLM-0640	3000 g	0.01 g	125 x 145	Rechargeable Batt.
CLM-0642	3500 g	0.01 g	300 x 230	Electrical
CLM-0643	4500 g	0.01 g	195 x 195	Electrical
CLM-0644	6000 g	0.01 g	195 x 195	Electrical
CLM-0645	15 kg	0.2 g	300 x 230	Rechargeable Batt.
CLM-0648	30 kg	0.1 g	310 x 220	Rechargeable Batt.
CLM-0654	60 kg	1 g	300 x 230	Electrical

	Under-bench Weighing facility	Dimensions	Weight(approx.)
CLM-0633	NO	250 X350 X 400	1.5 kg
CLM-0635	YES	300 X 400 X 400	4.5 kg
CLM-0637	YES	300 X 400 X 400	4.5 kg
CLM-0638	YES	300 X 400 X400	4.5 kg
CLM-0640	YES	250 X 350 X 400	3.5 kg
CLM-0642	YES	250 X 350 X 400	3.5 kg
CLM-0643	YES	250 X 350 X 400	4 kg
CLM-0644	YES	250 X 350 X 400	4 kg
CLM-0645	YES	300 X 400 X 400	4.5 kg
CLM-0648	YES	300 X 400 X 400	5.5 kg
CLM-0654	NO	300 X 400 X 400	5.5 kg

Product Enquiry

DIRECT RESIDUAL SHEAR

Product code

CLM-2060.SMPR	Automatic Direct-residual shear Test machine, 220 – 240 v 50 – 60 Hz
CLM-2065	Shearbox Assembly, 60 x 60 mm
CLM-2065-07	Cutting Ring , 60 x 60 mm
CLM-2065-08	Extrusion dolly, 60 x 60 mm
CLM-2066	Shearbox Assembly, Ø 60 mm
CLM-2066-07	Cutting Ring, Ø 60 mm
CLM-2066-08	Extrusion dolly, Ø 60 mm
CLM-2067	Shearbox Assembly, 100x100 mm
CLM-2067-07	Cutting Ring, 100x100 mm
CLM-2067-08	Extrusion dolly, 100x100 mm
CLM-2068	Shearbox Assembly, Ø100 mm
CLM-2068-07	Cutting Ring, Ø100 mm
CLM-2068-08	Extrusion dolly, Ø100 mm
CLM-2069	Shearbox Assembly, Ø2.5 mm
CLM-2069-07	Cutting Ring, Ø2.5 mm
CLM-2069-08	Extrusion dolly, Ø 2.5 mm
CLM-2100	Slotted weight set, 50.75 kg (4x10 kg +1x5 kg +2x2 kg +1x1 kg +1x0.5 kg + 1x0.25 kg )

standards

ASTM D3080; BS 1377:7; AASHTO T236, TS 1900-2 CEN- ISO-

TS 17892-10

The test covers the determination of consolidated drained shear strengh of a soil material by direct shear. CLM-CLM-2060.SMPR Automatic Direct - Residual Shear test Machine is mootorized and floor mounted. Normal stress is applied to the specimen by utilizing a weight hanger, a lever arm (amplification ratios of 9:1,10:1 and 11:1), and a verical loading yoke. Hanger can receive up to 50 kg of weight which is amplified by the lever arm and transferred to the specimen by the vertical loading yoke as a normal force up to 5 KN (5000 N).

Drive unit ulilizes a high resolution servomotor and a gear box assembly to ensure continuously variable transmission of speed in a range from 0.00001 mm-min. to 15 mm-min for both forward and reverse directions. 5 kN load cell is used for load measurement. 10 x 0.001 mm and 25 x 0.001 mm sensitivity linear potentiometric transducers are used for vertical and horizontal displacement measuremants respectively. displacemant limits are controlled by limit switch.

Shearbox assemblies, slotted weight set and other optional accessories including cutting ring and extrusion dolly should be ordered separately.

Models for 220-240v 50-60 Hz, 1ph	CLM-2060.SMPR
Models for 110-120v 60Hz, 1ph	CLM-2060.SMPR-N

Accessories of shear Box Assemblies

Model of	CLM-2065	CLM-2066	CLM-2067	CLM-2068	CLM-2069
Shear Box	60x60 MM	Ø:60 MM	100X100 MM	Ø:100 mm	Ø:2.5 inch
Shear Box	CLM-2065-01	CLM-2066-01	CLM-2067-01	CLM-2068-01	CLM-2069-01
Loading pad	CLM-2065-02	CLM-2066-02	CLM-2067-02	CLM-2068-02	CLM-2069-02
Base plate	CLM-2065-03	CLM-2066-03	CLM-2067-03	CLM-2068-03	CLM-2069-03
Porous plate	CLM-2065-04	CLM-2066-04	CLM-2067-04	CLM-2068-04	CLM-2069-04
Perforated Grid	CLM-2065-06	CLM-2066-06	CLM-2067-06	CLM-2068-06	CLM-2069-06

The Optional Accessories of CLM-2060 Automatic Direct / Residual shear Test Machine
Cutting Ring	CLM-2065-07	CLM-2066-07	CLM-2067-07	CLM-2068-07	CLM-2069-07
Extrusion Dolly	CLM-2065-08	CLM-2066-08	CLM-2067-08	CLM-2068-08	CLM-2069-08

U-Touch PRO Control Unit

The U-Touch PRO Control Unit is designed to control the machine to perform direct - residual shear test acc. to EN,ASTM/AASHTO and BS standards to process.

The Unit can perform direct - residual shear tests as a stand-alone without the use of a PC or with the CLM-2060 software and a PC.Control of machine, acquisition of load and displacement data in real

time are provided by the unit The U-Touch PRO has easy to use menu options.

It displays all menu option listings simultaneously, allowing the operator to access the required option quickly to activate that option or enter a numeric value to set the test parameters and see all the data while the test running. The U-Touch PRO graphic display allows real time Load vs.

Displacement or Stress vs. Displacement graph. The advanced functions for data base management provide an easy navigation of all saved data. The test results certificate includes all descriptive information.

Therefore, test parameters can be set, and details about the test carried out such as customer details, test type, specimen type, user info and other information required can be entered and printed out as well as test reports and graphs. Also, all minor revisions can be implemented upon request. The Software calculates both the maximum and resilient shear stress. After three runs, the software calculates the cohesion value “c” and shear resistance angle”φ” by using the best straight line fit.

Main Features

• Can make the test with displacement control

• Real time display of test graph.

• 4 analog channels for load cell and displacement sensor

• Calibration function for channels.

• Programmable digital gain adjustment for load-cell and potentiometric sensors, voltage

and current transmitters.

• Closed-loop PID for steady pace rate

• 25 pairs of time-vertical displacement values are written to memory.

• The vertical displacement value can be tared prior to recording.

• The analogical channel reading vertical displacement has 260000 points effective resolution.

• The memory can be exported to PC software. Testing

• 3 different shearing test types can be selected.

• The machine run with the speed determined by user to the direction of shear and stop

when the\ load decreases.

• The machine run with the speed determined by user to the direction of shear and stop when

it reaches to the target horizontal Displacement value which is also determined by the user

at the beginnig of the test.

• The machine run with the speed to the direction of shear, after reaching to the target

displacement, returns and finds the exact initial (HOME) position, waits for the dissipation

of excess pore pressure and starts to the same procedure again, User can creae

testin Scenarios by determining all the parameters of this multi-reversal shearing test

such as test speed, return speed, displacement target, standby time,and cycle number.

• By using the control unit, consolidation before shearing tests are possible.

• The screen displays load, shear stress, horizontal and vertical displacements, and τ-Δx

graph continuously.

• See the pages of “Data Aqusition and Control Units” for details of the properties of

software and hardware of U-Touch PRO Control Unit.

Software for Direct/Residual Shear Test

CLM Direct and Residual Shear Software is developed in accordance with ASTM D3080, BS 1377:7 and AASHTO T 236 standards to be used with CLM-2060.SMPR Machine.Direct residual and shear software consist of two sections. First section is used for the consolidation of the sample prior to shear. The second section of the software is capable of performing three different types of test. The first type moves the machine with the speed determined by user until a shear failure occurs. On the second type, the user can set a speed and a horizontal displacement and the test will continue until the machine reaches to the set value. On the last type of test, the machine can be configured for cyclic (multireversal) operation. In cyclic mode device will advance to the determined distance with an assigned speed and turn back to the initial (home) position with a different assigned speed, wait for a time for the dissipation of excess pore pressure and start to the new cycle again. All these test parameters such as forward-reverse speed, distance, cycle number, etc. can be defined by the user. These software resupports 5 different normal load values in order to calculate cohesion (C) and internal friction angle (Ø) values. Prior to the test normal load value must be entered to the software. The normal stress is calculated according to normal load and sample size automatically. The software supports both square and round type samples. Stress values can be optionally and automatically calculated as “ standard area ” and the “corrected area” approach. When the test is completed peak and residual stress values are recorded. The normal load versus peak stress pair is used for the calculation of cohesion and internal friction angle value. At least 3 loading with different normal loads are required for this property. One can set test speed, axis values etc. through the setup of the software. The results can be submitted asa report or can be exported to Microsoft Excel for advanced reanalyze procedures

The Automatic Direct Residual Shear Test Machine is supplied complete with

• Load Cell 5 kN

• Linear Potentiometric Displacement Transducer (10x0.001 mm)

• Linear Potentiometric Displacement Transducer (25x0.001 mm)

• Software

Speed Range	0.00001 to 10,00 mm/min
Maximum Shear Force	5 kN (5000 N)
Maximum Vertical Load	0 to 500 N
Horizontal Travel	30 mm
Dimensions	450x1250x1200 mm
Weight (approx.)	110 kg
Power	1100 W

Product Enquiry

DISPLACEMENT TRANSDUCERS DIAL GAUGES

CLM-0060	Liner potentiometric displacement transducer , travel 10 mm, resistance 1kO
CLM-0062	Liner potentiometric displacement transducer , travel 25 mm, resistance 1kO
CLM-0064	Liner potentiometric displacement transducer , travel 50 mm , resistance 5kO
CLM-0066	Liner potentiometric displacement transducer , travel 100 mm , resistance 5kO
CLM-0068	Liner potentiometric displacement transducer , travel 300 mm , resistance 5kO
CLM-0070	High Accurate strain Gage Based Displacement Transducer, 5mm
CLM-0072	High Accurate strain Gage Based Displacement Transducer, 10 mm
CLM-0078	High Accurate strain Gage Based Displacement Transducer, 50 mm
CLM-0079	High Accurate strain Gage Based Displacement Transducer, 100 mm
CLM-0090	Crack Mouth opening displacement , opening Range 7 mm gauge Length 5 mm
CLM-0120	Analog Dial gauge 30x0.01 mm , 0-100 scale , clockwise
CLM-0132	Analog Dial gauge 50x0.01 mm , 0-100 scale , clockwise
CLM-0148	Digital Dial gauge 25x0.01 mm , LCD Display
CLM-0152	Digital Dial gauge 12.7x0.01 mm , LCD Display
CLM-0180	General purpose strain Gauge , 10 mm
CLM-0182	General purpose strain Gauge , 20mm
CLM-0184	General purpose strain Gauge , 30mm
CLM-0186	Connection cable for strain gauge, 1 m
CLM-0188	Adhesive for strain gauge (1 package = 30 g)

Linear potentiometric Displacement Transducer provides an electric signal proportional to the linear shaft displacement. (CLM) supplies high quality linear potentiometric Transucers from 10 mm to 300 mm travel range for precise and accurate linear displacement measurements material testing.Dial gauges are essential instruments that are to measure accurately very small and diminutive linear distances. (CLM) offers analog and digital dial gauge models according to specific applications.High Accurate Strain gage based displacement Transducer provide 5 mv/v electrical signal to data acquisition units. For long life stability must be preferred.

Product Enquiry

DRYING WEIGHING GRADING

Product code

CLM-1000	Specific Gravity Frame
CLM-1003	Cradle for hardened concrete specimens
CLM-1005	Cradle for hardened concrete specimens
CLM-1008	Density basket, 120 mm dia x 160 mm deep, 3.5 mm mesh
CLM-1010	Density basket, 200 mm dia x 200 mm deep, 3.5 mm mesh
CLM-1012	Dencity basket, 250 mm dia x 250 mm deep, 3.5 mm mesh
CLM-1015	Density basket, 200 mm dia x 180 mm deep, 2 mm mesh
CLM-1017	Density basket, 230 mm dia x 260 mm deep, 4mm mesh

Standards

EN 1097-6, 12390-7

The CLM -1000 spcific gravity frame is used in conjunction with a suitable electronic balance for specific gravity determination of fresh and hardened concrete and aggregates.

Consisting of a purpose built robust frame designed to support the electronic balance.The lower part of the frame incorporates a moving platform, which carries the water tank allowing the test specimens to be weighed in both air and water. any type of electronic balance fitled with under-bench weighing facility can be used.

Balance, cradle and density basket should be ordered separately.

The Specific gravity frame is supplied complete with

. A water tank

Dimensions	600x500x1100 mm
weight [approx.]	25 kg

Product Enquiry

ELECTRONIC ANALYTICAL BALANCES

Product code

CLM-0620	Electronic Analytical Balance, LCD Screen 60- 220 g 0.00001 -0.0001 g
CLM-0622	Electronic Analytical Balance, LCD Screen 220 g 0.0001 g
CLM-0625	Electronic Analytical Balance 200 g x 0.001 g
CLM-0628	Electronic Analytical Balance 360 g x 0.001 g
CLM-0630	Electronic Analytical Balance 510 g x 0.001 g
CLM-0631	Electronic Analytical Balance 750 g x 0.001 g
CLM-0632	Electronic Analytical Balance 1000 g x 0.001 g

The CLM Series Electronic Analytical Balances set the standard in terms of reliable measurements. User-friendly and long service life. Offering capacities from 200 g to 510 g with high sensitivities up to 0.01 mg readability makes these balances ideal for weighing small sample amounts. The balance can be used for routine tasks and/ or complicated weighing procedures.

The CLM -0620and CLM -0622 models have an automatic internal calibration feature. The other models in the range require external calibration.

The CLM Series Analytical Balances provide fast and easy installation and cleaning with their ergonomic designs and brilliant display. They can also be connected to printers or PC’s through RS 232 outputs to give excellent monitoring and reporting performance.

	Capacity	Readability	Pan size (mm)	Additional Power supply
CLM-0620	60 -220 g	0.01 g-0.1 mg	Ø 70	AC Adapter
CLM-0622	220 g	0.1 mg	Ø 85	AC Adapter
CLM-0625	200 g	1 mg	Ø 115	Rechargeable battery
CLM-0628	360 g	1 mg	128 x 128	AC Adapter
CLM-0630	510 g	1 mg	128 x 128	AC Adapter
CLM-0631	750 g	1 mg	128 x 128	AC Adapter
CLM-0632	1000 g	1 mg	128 x 128	AC Adapter

	Under- bench Weighing facility	Dimension	Weight (approx.)
CLM-0620	Yes	210 x 335 x 355 mm	6 kg
CLM-0622	Yes	300 x 400 x 400 mm	6 kg
CLM-0625	No	175 x 245 x 80 mm	1.5 kg
CLM-0628	Yes	210 x 335 x 160 mm	3.5 kg
CLM-0630	Yes	210 x 335 x 160 mm	3.5 kg
CLM-0631	Yes	215 x 350 x 160 mm	4 kg
CLM-0632	Yes	230 x 380 x 160 mm	4.5 kg

Product Enquiry

ELONGATION INDEX

Product Code

CLM-0455

Length Gauge (Elongation Index BS)

Standards

BS 812-105.2

Length gauge (Elongation index BS), is used for determining the elongation index of aggregates.

The Particle is elongated when its length (longest dimension) is more than 1.8 of the midsize of the sieve fraction. the aggregate to be classified is separated into six sieve Fractions from 6.3 to 50 mm, and each fraction is examined separately.

Dimensions

370x70x70 mm

Weight (approx.)

0.82 kg

Product Enquiry

EXTRUDING SOIL SAMPLES

Product Code

CLM-0082

Hand Operated Hydraulic Specimen Extruder, Vertical Type, 60 kN Capacity

Standards

EN 13286-2, 13286-47, 12697-30; AASHTO T134, T180, T193,T245; ASTM D698,

D1557, D1883, D1559; BS 1377-4, 1924-2, 598-107

The CLM-0082 Hand Operated Hydraulic Extruder is designed for the manual extrusion of specimens from standard BSP (U4) threaded sample tubes 100 mm, (4”) and 150 mm (6”) Compaction Moulds,

CBR and Marshall Moulds. The extruder has 60 KN extrusion force and 650 mm ram travel.

Supplied complete with 2 pcs. adaptors for Ø100 mm (4”) and Ø150 mm (6”) dia. moulds.

The Hand Operated Hydraulic Extruder is supplied

complete with;

• Adaptors for Ø100 mm (4”) and Ø150 mm (6”) dia.. moulds

Dimensions	450x650x1650 mm(case)
Weight (approx.)	90 kg

Product Enquiry

FIELD INSPECTION KIT

Product Code

CLM-0080	Field Inspection Testing Kit
CLM-0082	Field Inspection Pocket Vane Tester
CLM-0083	Extension Rod for UTS-0082
CLM-0084	Heavy Duty Pocket Penetrometer, 0-10 kgf/cm2

Standards

ASTM D2573

The CLM-0080 Field Inspection Testing Kit is ideal for geotechnicians, geologists

and agronomists. It consists of the CLM-0084 Pocket Penetrometer and of the

CLM-0082 Field Inspection Pocket Vane Tester. The instrument is contained

In a practical carrying case.

CLM-0080 Field Inspection Testing Kit
Dimensions (packed)	240x210x50 mm
Weight approx.	1.8 kg

The CLM-0082 Field Inspection Pocket Vane Tester is especially designed to measure

the undrained shear strength (CU) of cohesive soils, consists of a cylindrical body

with a torsional spring and three interchangeable vanes of different sizes used depending

upon the expected strength of the soil. The height/diameter ratio of all vanes is 2. During

operation the vane is driven for 5-6 cm into the soil and then turned with the handle.Deep

measures (i.e. on the top of undisturbed samples) can be obtained using the extensionrod.

All stainless steel construction. Supplied in a plastic case. Extension rod should be

Ordered separately.

CLM-0082 Field Inspection Pocket Vane Tester
Vane Dimensions (height X dia.)	32x16; 40x20, 50.8x25.4 mm
Measuring Range	0 to 240 kPa (0-24 N/cm )
Torque Value	5 N · m
Extension Rod	500 mm depth.
Overall Dimensions (assembled)	310x105 mm
Weight approx.	1.3 kg

The CLM-0084 Heavy Duty Pocket Penetrometer is designed for making field classification

Of cohesive soils in terms of consistency, shear strength and approximate unconfined

compressive strength. Heavy duty model is all stainless steel construction, three

interchangeable tips: 4.5 mm dia. for very hard soil, 6.35 mm for medium and soft soil,

8.98 mm for soft soil. Supplied complete with plastic case.

CLM-0084 Heavy Duty Pocket Penetrometer
Measuring Range	0 to 10 kgf/cm
Dimensions (assembled)	210 mm length x 20 mm dia
Weight approx.	0.5 kg

Product Enquiry

FLAKINESS INDEX

Product code

CLM-0450

Thickness Gauge (Flakiness Index BS)

Standards

BS 812-105.1

Thickness gauge is used to determine if the aggregate particles are to be considered as flaky, i.e.their thickness is less than 0.6 of their nominal size.

The aggregate to be classified is separated into seven sieve fractions from 6.3 to 63 mm,and each fraction is examined separately.slot sizes are 4.9x30 mm,7.2x40 mm,10.2x50 mm,14.4x60 mm,19.7x80 mm,26.3x90 mm and 33.9x100 mm.

Dimensions	310x130x10 mm
Weight (approx.)	0.4 kg

Product Enquiry

FLEXURAL TESTING ACCESSORIES

Product code

CLM-5501	Flexural testing Assembly for concrete beams, set of 2 upper and 2 lower rollers of 38 mm dia and 160 mm length
CLM-5502	Flexural testing assembly for concrete kerbs set of 2 lower of 38 mm dia.x620 mm length and upper load point of 40 mm dia with ball seating.
CLM-5504	Flexural testing assembly set of 2 lower and 1 upper roller of 38 mm dia.and 620 mm length.
CLM-5506	Auxiliary testing frame for the measurement of deflection on concrete beams with 2 pcs.linear potentiometric displacement transducer
CLM-5507	Auxiliary testing frame for the measurement of deflection on beams with 2 pcs.high accurate displacement transdure
CLM-1116	Upper platen with ball seating assembly 0165 mm and lower platen 0165 mm
CLM-5510	Distance piece (0165 mmx20 mm thick) for flextural testing frame

Standards

EN 1338, 1339, 1340, 12390-5, 12390-6; BS 188: ASTM C7B, C293, C496, UNI10834

CLM-5501 Flexural testing assembly for concrete beams

CLM-5502 Flexural Testing Assembly for Concrete Kerbs

CLM-5504 Flexural Test Assembly

The test assembly, conforming with EN 12390-5, ASIM C78, ASTM C293, BS 1881:118, is used for center or two point (third point loading-ASTM) loading flexural tests on 100 mm or 150 mm concrete beams.

Can be used with all CLM flexural testing frames.the distance of lower roller can be adjusted between 100 mm to 800 mm. the distance between upper roller can be set to 100 mm or 150 mm.for center-point loading flextural test one of the rollers can be removed and the other placed in the center.the rollers diamensions are 38 mm dia.x 160 mm length.

The testing assembly, conforming with EN 1340,is used for flexural tests on concrete kerbs.the set consists of two lower roller 38 mm dia.x620 mm long and 40 mm dia.upper loading piston with ball seating assembly.

Can be used with all CLM flexural testing frames. the distance of lower rollers can be adjusted between 100 mm to 800 mm.

CLM-5504 Flexural testing assembly consist of two lower roller and one upper roller of 38 mm dia.and 620 mm length is used for flexural tests on concrete paving flags and concrete terrazo tiles,natural stone kerbs and slabs.The distance of lower rollers can be adjusted between 100 mm to 800 mm.conform with EN 1339,EN 1343,EN 12372.

For the samples with low strenght 10 kn loadcell connection flange and adaptor for the loadcell should be orderd seperately.

Dimensions

200x200x200

Dimensions

620X250X100 mm

Dimensions

620X260X150 mm

Weight (approx.)

16 kg

Weight (approx.)

17 kg

Weight (approx.)

25 kg

CLM-5506 & CLM-5507 Auxiliary testing frames for the measurement of deflection on concrete beams

The Auxiliary testing frame is used for the measurement of deflection during the flexure test on 100x100x400/500 mm and 150x150x500/600 mm beams conforming to ASTM C1018.

The auxiliary testing frames can be used on all CLM flexural testing frames.

For displacement controlled test, CLM-5507 auxiliary testing frames with high accurate displacement transducers should be used with CLM-4850 or CLM-4860 advanced servo controlled automatic power packs with proportional valve units or CLM-4870 advanced servo controlled automatic power pack with servo valve.

For load controlled test,CLM-5506 auxiliary testing frames with liner potantiometic displacement transdurs or CLM-5507 auxiliary testing frames with high accurate displacement transducers should be used with any CLM serve controlled or automatic power packs.

CLM-5506 auxiliary testing frame is supplied complete with 2 pcs. Linear potantiometric displacement transducers (10 mmx 0,001 mm CLM-0060) and CLM-5507 auxiliary testing frame is supplied complete with 2 pcs. High accurate displacement transducers (10 mm x 0,001 mm CLM-0072).

CLM-5501 flexural test assembly for concrete beams should be ordered separately.

Dimensions	500x250x100 mm
Weight (approx.)	4 kg

Spilitting tensile test for concrete paving blocks and compressive strength test with flexural testing frames.

The test assembly is used to perform spilitting tensile tests with the utest flexure testing frames.

The set consists of CLM-1116 upper platen (with spherical seating assembly) 0165 mm and lower platen 0165 mm and CLM-5510 distance piece (0165x20 mm thick).for the spilitting tensile test for concrete paving blocks (EN 1338),splitting tensile test device (CLM-0355) should be ordered separately.

For the compressive strength test, depending on the height of the specimens to be tested, 0165 mm distance pieces (15 mm: CLM-4630, 30 mm: CLM-4631, 50 mm: CLM-4633, 90 mm: CLM-4634) should be ordered separately.

	Dimensions	weight (approx.)
CLM-1116	170x170x145 mm	9 kg
CLM-5510	210x210x30 mm	2 kg
CLM-0355	240x160x320 mm	17,5 kg
CLM-4630	165x285x20 mm	2,5 kg
CLM-4631	165x285x35 mm	5 kg
CLM-4633	165x285x55 mm	8 kg
CLM-4634	165x285x95 mm	14 kg

Product Enquiry

FLOW CONSISTENCY OF CEMENT LIME MORTAR

Product Code

CLM-0060/A	Cement Flow Table ASTM, metric
CLM-0061/A	Cement Flow Mould ASTM , metric
CLM-0062/A	Tamper ASTM Hardwood 13x25x150 mm
CLM-0063/A	Motorized Cement Flow Table ASTM, 220-240 V 50 Hz
CLM-0063/A/110	Motorized Cement Flow Table ASTM,110 V 60 Hz
CLM-0060/E	Cement Flow Table EN
CLM-0061/E	Cement Flow Mould EN
CLM-0062/E	Tamper EN Ø 40x200 mm 250 gr
CLM-0063/E	Motorized Cement Flow Table EN, 220-240 V 50 Hz

Standards

ASTM C230; EN 459-2, 1015-3

There are two models of the Cement Flow Table, the CLM-0060/A conforming to ASTM and the CLM 0060/E conforming to the EN standard. Both are used for determining the consistency of mortar, lime and cement specimens. Manual and motorized models are available.

The hand operated model is fitted with a hand wheel. The motor operated model is driven by a motor speed reducer through a mechanical coupling. The number of drops is preset on a counter and the machine stops automatically at the end of the cycle.

EN model, the table is manufactured from stainless steel and has a 300 mm diameter table. The conical mould is made of brass and has dimensions of 100 mm base dia. x 70 mm top dia. x 60 mm height. ASTM model; the table is manufactured from brass and has 254 mm diameter. The conical mould is made of brass has dimensions of 100 mm base dia. X 70 mm top dia. X 50 mm height. Both models are supplied complete with brass flow mould and tamper. 60 Hz versions are available and should be mentioned on your order if required.

	CLM-0060/A CLM-0063/A ASTM	CLM-0060/E CLM-0063/E EN
Table Diameter	254 mm	300 mm
Cone Base/Top Diameter	100.0 mm /70.0 mm	100.0mm /70.0 mm
Cone Height	50.0 mm	60.0 mm
Drop Height	12.7 mm	10.0 mm

Dimensions	Manual	260x260x270 mm
Dimensions	Motorized	470x360x350 mm
Weight (approx.)	Manual	13 kg
Weight (approx.)	Motorized	36 kg
Power	180 W ( Motorized )

Product Enquiry

GENERAL GLASSWARE

	Description	Dimensions	Weight
CLM-1000	Graduated Glass Cylinder 10 ml	13x13x140 mm	0.05 kg
CLM-1005	Graduated Glass Cylinder 25 ml	20x20x145 mm	0.1 kg
CLM-1010	Graduated Glass Cylinder 50 ml	26x26x180 mm	0.1 kg
CLM-1015	Graduated Glass Cylinder 100 ml	30x30x250 mm	0.1 kg
CLM-1020	Graduated Glass Cylinder 250 ml	40x40x320 mm	0.2 kg
CLM-1025	Graduated Glass Cylinder 500 ml	50x50x390 mm	0.25 kg
CLM-1030	Graduated Glass Cylinder 1000 ml	65x65x460 mm	0.5 kg
CLM-1035	Graduated Glass Cylinder 2000 ml	120x120x550 mm	0.75 kg
CLM-1300	Borosilicate Glass Beaker 10 ml	34x34x50 mm	0.01 kg
CLM-1305	Borosilicate Glass Beaker 25 ml	42x42x60 mm	0.05 kg
CLM-1310	Borosilicate Glass Beaker 50 ml	50x50x70 mm	0.01 kg
CLM-1315	Borosilicate Glass Beaker 100 ml	60x60x80 mm	0.01 kg
CLM-1320	Borosilicate Glass Beaker 250 ml	70x70x95 mm	0.01 kg
CLM-1325	Borosilicate Glass Beaker 400 ml	80x80x100 mm	0.02 kg
CLM-1330	Borosilicate Glass Beaker 600 ml	90x90x125 mm	0.25 kg
CLM-1335	Borosilicate Glass Beaker 800 ml	100x100x135 mm	0.05 kg
CLM-1340	Borosilicate Glass Beaker 1000 ml	105x105x145 mm	0.75 kg
CLM-1345	Borosilicate Glass Beaker 2000 ml	130x130x185 mm	1 kg
CLM-1350	Borosilicate Glass Beaker 3000 ml	30x30x300 mm	2 kg
CLM-1500	Pyknometer (Specific Gravity Bottle) 25 ml	40x40x90 mm	0.05 kg
CLM-1505	Pyknometer (Specific Gravity Bottle) 50 ml	50x50x100 mm	0.05 kg
CLM-1510	Pyknometer (Specific Gravity Bottle) 100 ml	60x60x120 mm	0.5 kg
CLM-1515	Pyknometer (Specific Gravity Bottle) 250 ml	100x100x150 mm	0.1 kg
CLM-1520	Pyknometer (Specific Gravity Bottle) 500 ml	110x110x200 mm	0.1 kg
CLM-1525	Pyknometer (Specific Gravity Bottle) 1000 ml	150x150x220 mm	0.2 kg
CLM-1530	Pyknometer (Specific Gravity Bottle) 2000 ml	200x200x250 mm	0.3 kg
CLM-1600	Pyknometer (Bottle Type) Double Edged and capillary Tubed Funnel 250 ml	110x110x270 mm	0.4 kg
CLM-1605	Pyknometer (Bottle Type) Double Edged and capillary Tubed Funnel 500 ml	130x130x270 mm	0.7 kg
CLM-1610	Pyknometer (Bottle Type) Double Edged and capillary Tubed Funnel 1000 ml	150x150x270 mm	0.9 kg
CLM-1615	Pyknometer (Bottle Type) Double Edged and capillary Tubed Funnel 2000 ml	180x180x330 mm	1.25 kg
CLM-1620	Pyknometer (Bottle Type) Double Edged and capillary Tubed Funnel 3000 ml	200x200x340 mm	1.35 kg
CLM-1625	Pyknometer (Bottle Type) Double Edged and capillary Tubed Funnel 5000 ml	250x250x340 mm	1.5 kg
CLM-1630	Double Edge and Capillary Tubed Funnel For Bottle Type Pyknometer	55x55x250 mm	0.1 kg
CLM-1700	Graduated Impurites Test Bottle, Glass 250 ml	100x100x200 mm	0.25 kg
CLM-1705	Graduated Impurites Test Bottle, Glass 500 ml	200x200x400 mm	0.5 kg
CLM-1710	Graduated Impurites Test Bottle, Glass 1000 ml	300x300x500 mm	1 kg
CLM-1715	Graduated Impurites Test Bottle, Glass 2000 ml	450x450x700 mm	1.75 kg
CLM-1720	Cylindrical Glass Bottle, Wih Stopper, For Organic Impurities, 450 ml, EN	80x80x210 mm	0.5 kg
CLM-1800	Volumetric Flask 5 ml	20x20x40 mm	0.01 kg
CLM-1805	Volumetric Flask 10 ml	30x30x50 mm	0.05 kg
CLM-1810	Volumetric Flask 25 ml	45x45x70 mm	0.1 kg
CLM-1815	Volumetric Flask 50 ml	51x51x95 mm	0.1 kg
CLM-1820	Volumetric Flask 100 ml	64x64x110 mm	0.1 kg
CLM-1825	Volumetric Flask 250 ml	70x70x120 mm	0.2 kg
CLM-1830	Volumetric Flask 500 ml	85x85x145 mm	0.25 kg
CLM-1835	Volumetric Flask 1000 ml	105x105x175 mm	0.5 kg
CLM-1840	Volumetric Flask 2000 ml	131x131x200 mm	0.75 kg
CLM-1845	Volumetric Flask 3000 ml	166x166x260 mm	1 kg
CLM-1850	Volumetric Flask 5000 ml	207x207x315 mm	2 kg
CLM-1900	Erlenmeyer Flask 50 ml	51x51x95 mm	0.05 kg
CLM-1905	Erlenmeyer Flask 100 ml	64x64x110 mm	0.1 kg
CLM-1910	Erlenmeyer Flask 150 ml	74x74x115 mm	0.13 kg
CLM-1915	Erlenmeyer Flask 250 ml	85x85x145 mm	0.2 kg
CLM-1920	Erlenmeyer Flask 300 ml	87x87x150 mm	0.45 kg
CLM-1925	Erlenmeyer Flask 500 ml	105x105x174 mm	0.6 kg
CLM-1930	Erlenmeyer Flask 1000 ml	70x70x120 mm	1 kg
CLM-1935	Erlenmeyer Flask 2000 ml	131x131x220 mm	1.6 kg
CLM-1940	Erlenmeyer Flask 5000 ml	166x166x280 mm	3 kg
CLM-2000	Filter Flask 250 ml	187X187X310 mm	0.2 kg
CLM-2005	Filter Flask 500 ml	166x166x260 mm	0.25 kg
CLM-2010	Filter Flask 1000 ml	207x207x315 mm	1 kg
CLM-2015	Filter Flask 2000 ml	207x207x315 mm	2 kg

Product code	Description	Dimensions	Weight
CLM-2100	Desiccator 210 mm dia.	310x310x250 mm	3.50 kg
CLM-2105	Desiccator 240 mm dia.	340x340x300 mm	3.50 kg
CLM-2110	Desiccator 300 mm dia.	400x400x350 mm	3.50 kg
CLM-2115	Desiccator 210 mm dia. Vacuum Type	310x310x250 mm	3.50 kg
CLM-2120	Desiccator 240 mm dia. Vacuum Type	340x340x300 mm	3.50 kg
CLM-2125	Desiccator 300 mm dia. Vacuum Type	400x400x350 mm	3.50 kg
CLM-2165	Porcelain Evaporating Dish 10 cm dia.	100x100x80 mm	0.25 kg
CLM-2170	Porcelain Evaporating Dish 10 cm dia.	120x120x80 mm	0.25 kg
CLM-2200	Porcelain Mortar with Pestle 100 mm dia.	100x100x80 mm	0.25 kg
CLM-2205	Porcelain Mortar with Pestle 130 mm dia.	130x130x80 mm	0.25 kg
CLM-2210	Porcelain Mortar with Pestle 160 mm dia.	160x160x80 mm	0.25 kg
CLM-2215	Rubber Headed Pestle	100x125x80 mm	0.25 kg
CLM-2235	Porcelain Crucible 4 cm dia.x4.7 mm high	101x101x40 mm	0.25 kg
CLM-2260	Glass Stirring Rod	20x20x mm	0.25 kg
CLM-2270	Petri Dish 80 mm, Glass	80x80x80 mm	0.25 kg
CLM-2275	Petri Dish 100 mm, Glass	120x120x80 mm	0.25 kg
CLM-2280	Petri Dish 120 mm, Glass	100x100x80 mm	0.25 kg
CLM-2300	Pipette 5 ml	20x20x360 mm	0.25 kg
CLM-2305	Pipette 10 ml	20x20x360 mm	0.25 kg
CLM-2310	Pipette 25 ml	20x20x450 mm	0.25 kg
CLM-2315	Pipette 50 ml	20x20x550 mm	0.25 kg
CLM-2350	Pasteur Pipette 3 ml, Plastic, 100 pcs	20x20x120 mm	0.02 kg
CLM-2355	Pipette Bulb	35x35x150 mm	0.10 kg
CLM-2400	Hydrometer 700-800	30x30x300 mm	0.10 kg
CLM-2401	Hydrometer 800-900	30x30x300 mm	0.10 kg
CLM-2405	Hydrometer 900-1000	30x30x300 mm	0.10 kg
CLM-2410	Hydrometer 1000-1100	30x30x300 mm	0.10 kg
CLM-2415	Hydrometer 1100-1200	30x30x300 mm	0.10 kg
CLM-2420	Hydrometer 1200-1300	30x30x300 mm	0.10 kg
CLM-2425	Hydrometer 1300-1400	30x30x300 mm	0.10 kg
CLM-2430	Hydrometer 1400-1500	30x30x300 mm	0.10 kg
CLM-2435	Hydrometer 1500-1600	30x30x300 mm	0.10 kg
CLM-2440	Hydrometer 1600-1700	30x30x300 mm	0.10 kg
CLM-2445	Hydrometer 1700-1800	30x30x300 mm	0.10 kg
CLM-2450	Hydrometer 1800-1900	30x30x300 mm	0.10 kg
CLM-2455	Hydrometer 1900-2000	30x30x300 mm	0.10 kg
CLM-2485	Hand Pump for Pipette/Burette	20x20x180 mm	0.01 kg
CLM-2490	Hand Pump, Three way for Pippete /Burette	20x20x180 mm	0.01 kg
CLM-2525	Burette 25 ml	50x50x820 mm	0.25 kg
CLM-2550	Burette 50 ml	50x50x820 mm	0.25 kg
CLM-2580	Glass Funnel 80 mm	80x80x80 mm	0.25 kg
CLM-2585	Glass Funnel 100 mm	100x100x100 mm	0.25 kg
CLM-2590	Glass Funnel 200 mm	200x200x175 mm	0.25 kg

Product Enquiry

GENERAL HARDWARE

CLM-1200	Mixing Bowl ?: 160 mm, Stainless steel 160x160x100 mm 0.25 kg
CLM-1205	Mixing Bowl ?: 180 mm, Stainless steel 180x180x100 mm 0.25 kg
CLM-1300	Mixing tray 27x46x4 cm, stainless steel (31x48x4 cm outer dim.) 270x460x40 mm 0.4 kg
CLM-1305	1305 Mixing tray 26x41x41 cm, stainless steel (28x43x4 cm outer dim) 260x410x40 mm 0.4 kg
CLM-1310	Mixing Tray 25x36x4 cm, stainless steel (26x38x4 cm outer dim) 250x360x40 mm 0.4 kg
CLM-1315	Mixing Tray 23x33x4 cm , stainless steel (23x33x4 cm outer dim) 230x330x40 mm 0.4 kg
CLM-1320	Mixing Tray 17x27x4 cm , stainless steel (20x30x4 cm outer dim) 170x270x40 mm 0.4 kg
CLM-1325	Mixing Tray 20x20x5 cm , stainless steel 200x200x50 mm 1.5 kg
CLM-1330	Mixing Tray 30x30x5 cm , stainless steel 300x300x50 mm 1.5 kg
CLM-1335	Mixing Tray 40x40x5 cm , stainless steel 400x400x50 mm 2.5 kg
CLM-1340	Mixing Tray 50x50x5 cm , stainless steel 500x500x50 mm 5 kg
CLM-1345	Mixing Tray 60x60x5 cm , stainless steel 600x600x50 mm 7.5 kg
CLM-1350	Mixing Tray 100x100x5 cm , stainless steel 1000x1000x50 mm 12 kg
CLM-1360	Test cup (circular cross section 200x200x100 mm 1.0 kg
CLM-1399	Sample cup, ?: 140 mm x h: 9, 5 mm, aluminium
CLM-1400	Moisture contact tin with lid ?:120 mm x h: 100 mm, aluminium 120x120x100 mm 0.2 kg
CLM-1402	1402 Moisture contact tin with lid ?:104 mm x h: 150 mm, aluminium 104x70x104 mm 0.2 kg
CLM-1405	Moisture contact tin with lid ?:100 mm x h: 70 mm, aluminium 100x100x70 mm 0.2 kg
CLM-1407	1407 Moisture contact tin with lid ?:80 mm x h: 80 mm, aluminium 80x80x80 mm 0.2 kg
CLM-1410	Moisture contact tin with lid ?:80 mm x h: 45 mm, aluminium 80x80x45 mm 0.2 kg
CLM-1415	1415 Moisture contact tin with lid ?:70 mm x h: 45 mm, aluminium 70x70x45 mm 0.2 kg
CLM-1420	Moisture contact tin with lid ?:66 mm x h: 44 mm, aluminium 66x66x44 mm 0.2 kg
CLM-1425	Moisture contact tin with lid ?:55 mm x h: 35 mm, aluminium 55x55x35 mm 0.2 kg
CLM-1430	Moisture contact tin with lid ?:45 mm x h: 10 mm, aluminium 45x45x10 mm 0.2 kg
CLM-1433	Moisture contact tin with lid ?:75 mm x h: 30 mm, aluminium 75x75x30 mm 0.2 kg
CLM-1435	1435 Moisture contact tin with lid 0:75 mm x h: 50 mm, aluminium 75x75x50 mm 0.2 kg
CLM-1460	1460 Lever Lid Container 0:160 mm x h: 235 mm, aluminium 160x160x235 mm 0.25 kg
CLM-1480	Spatula rigid, straight edged 100x40x200 mm 0.3 kg
CLM-1485	Spatula large, length: 200 mm 30x10x310 mm 0.2 kg
CLM-1490	Spatula medium, length:150 mm 30x10x280 mm 0.2 kg
CLM-1495	Spatula small, length:100 mm 20x10x190 mm 0.2 kg
CLM-1520	Bristle brush 50 mm wide 50x200x50 mm 0.1 kg
CLM-1525	Wire brush with handle 60x120x60 mm 0.15 kg
CLM-1530	Round bristle brush 50x180x50 mm 0.15 kg
CLM-1535	Double ended brass/nylon sieve brush 75x75x75 mm 0.1 kg
CLM-1600	Round scoop small 245x80x120 mm 0.2 kg
CLM-1605	Round scoop medium 335x120x120 mm 0.3 kg
CLM-1610	Round scoop large 380x140x140 mm 0.4 kg
CLM-1615	Round scoop extra large 420x160x150 mm 0.5 kg
CLM-1630	Shovel 1300x300x250 mm 2.5 kg
CLM-1640	Trowel plasterer type, rectangular 120x300x120 mm 0.2.5 kg
CLM-1640	Trowel plasterer type, rectangular 120x300x120 mm 0.25 kg
CLM-1650	Trowel cut edge brickmason type 30x150x30 mm 0.5 kg
CLM-1655	Trowel, pointing type 90x115x165 mm 0.25 kg
CLM-1660	Tongs 30x150x30 mm 0.5 kg
CLM-1670	Hammer 1, 5 kg 100x300x80 mm 0.5 kg
CLM-1680	Chisel 40x140x30 mm 1 kg
CLM-1685	Chisel flat ended 40x140x30 mm 1 kg
CLM-1695	Rubber mallet 75x80x300 mm 1 kg
CLM-1700	Density spoon 70x70x320 mm 0.2 kg
CLM-1710	Scoop 70x70x320 mm 0.2 kg
CLM-1730	Clamp 50x60x70 mm 0.2 kg
CLM-1750	Scissors 80x120x40 mm 0.2 kg
CLM-1770	Trolley 800x400x870 mm 18 kg
CLM-1775	Wheel barrow 700x1400x650 mm 20 kg
CLM-1795	Stand clamp, small 60x60x100 mm 25 kg
CLM-1800	Iron wire gauze 12x12 mm 120x120x10 mm 0.1 kg
CLM-1835	Iron wire gauze 16x16 mm 160x160x10 mm 0.1 kg
CLM-1850	Magnetic holder 16x16 mm 100x100x130 mm 0.5 kg
CLM-1875	Bunsen burner (butane/propane) 100x100x130 mm 0.5 kg
CLM-1880	Bunsen burner (natural gas) 100x100x130 mm 0.5 kg
CLM-1885	Tripod for bunsen burner 300x300x300 mm 1 kg

Product Enquiry

GENERAL LABORATORY

Product code

Trowels

Standards

CLM-D1619

Trowel 90x115x165 mm to EN 12350-4

CLM-1620

Trowel 60x140 mm

CLM1621

Trowel,100 mm, pointed type

CLM-1622

Cement trowel

CLM-1625

Rectangular trowel, 120x250 mm

Product Enquiry

GENERAL PLASTICWARE

Product Code	Description	Dimensions	Weight
CLM-0718	Plastic Graduated Cylinder 10 ml	13x13x140 mm	0.05 kg
CLM-0719	Plastic Graduated Cylinder 25 ml	20x20x145 mm	0.10 kg
CLM-0720	Plastic Graduated Cylinder 50 ml	26x26x180 mm	0.10 kg
CLM-0721	Plastic Graduated Cylinder 100 ml	30x30x250 mm	0.10 kg
CLM-0722	Plastic Graduated Cylinder 250 ml	40x40x320 mm	0.20 kg
CLM-0723	Plastic Graduated Cylinder 500 ml	50x50x390 mm	0.25 kg
CLM-0724	Plastic Graduated Cylinder 1000 ml	65x65x460 mm	0.50 kg
CLM-0725	Plastic Graduated Cylinder 2000 ml	120x120x550 mm	0.75 kg
CLM-0444	Plastic Beaker 50 ml	42x42x60 mm	0.05 kg
CLM-0445	Plastic Beaker 100 ml	50x50x70 mm	0.10 kg
CLM-0446	Plastic Beaker 250 ml	60x60x80 mm	0.10 kg
CLM-0447	Plastic Beaker 500 ml	80x80x100 mm	0.10 kg
CLM-0448	Plastic Beaker 1000 ml	100x100x135 mm	0.20 kg
CLM-0449	Plastic Beaker 2000 ml	105x105x145 mm	1.00 kg
CLM-0970	Plastic Beaker 3000 ml	130x130x185 mm	1.50 kg
CLM-0450	Plastic Beaker 5000 ml	150x150x200 mm	2.00 kg
CLM-0980	Tromp Tire	60X60X160 mm	0.10 kg
CLM-0498	Wash Bottle 250 ml	60X60X160 mm	0.10 kg
CLM-0499	Wash Bottle 500 ml	90X90X190 mm	0.15 kg
CLM-0500	Wash Bottle 1000 ml	110X110X210 mm	0.20 kg
CLM-0554	Plastic Funnel 40x65 mm	100X100X120 mm	0.10 kg
CLM-0557	Plastic Funnel 100x155 mm	100X100X120 mm	0.10 kg
CLM-1050	Latex Gloves, pack of 100	100X200X100 mm	0.50 kg
CLM-1055	Heat Resistant Gloves	110X180X20 mm	0.10 kg
CLM-1060	Leather Gloves	110X180X20 mm	0.10 kg
CLM-1065	Cotton Gloves	110X180X20 mm	0.10 kg
CLM-11070	Rubber Gloves	110X180X20 mm	0.10 kg
CLM-1100	Plastic Bucket 20 lt.	300x350x450 mm	3.00 kg
CLM-1105	Plastic Bucket 45 lt	450x480x550 mm	5.00 kg
CLM-1110	Plastic Bucket 60 lt.	500x550x600 mm	5.00 kg
CLM-1150	Sample Bag 400x600 mm (heavy plastic, 1 unit)	400x600x20 mm	0.01 kg
CLM-1155	Sample Bag 250x400 mm (heavy plastic, 1 unit)	250x400x20 mm	0.01 kg
CLM-1160	Sample Zipper Bag 170x230 mm (plastic, pack of 400)	170x230x100 mm	0.50 kg
CLM-1165	Sample Zipper Bag 260x350 mm (plastic, pack of 200)	260x350x100 mm	0.50 kg
CLM-0207	Rubber Stopper 30/25 mm dia. 30 mm high	30X25X30 mm	0.20 kg
CLM-0207	Rubber Stopper 35/30 mm dia. 30 mm high	35X30X30 mm	0.20 kg
CLM-0207	Rubber Stopper 40/30 mm dia. 35 mm high	40X30X35 mm	0.20 kg
CLM-0207	Rubber Stopper 50/40 mm dia. 35 mm high	50X40X35 mm	0.20 kg
CLM-1250	Water Gauge 60 cm	80X80X600 mm	1.00 kg

Product Enquiry

GLOVES

Product code

Gloves

Standards

CLM-1529

High temperature resistant gloves, up to 450°c

CLM-1530

Heat resistant gloves

CLM1531

Neoprene gloves

CLM-1532

Cotton gloves

CLM-1533

Soft leather gloves

CLM-1534

Rubber PVC gloves

Product Enquiry

IN SITU DENSITY TESTS

Product code

CLM-0950	sand cone set 6.5"
CLM-0960	sand cone set 12"
CLM-0952	plastic sand jar 5 l for CLM-0950
CLM-0962	Density cylinder, 12"

Standards

ASTM D 1556; AASHTO T181,T191

THE CLM-0950 and CLM-0960 Sand cone sets are used for the determination of the degree of compaction on site. CLM-0950 includes double cone, plastic sand jar and metal tray with flanged hole.

CLM-0962 Density cylinder is used for determining in place density of compacted base courses containing large sizes of corse aggregates

Product code	Dimensions	Weight (approx.)
CLM-0950	300X300X550 MM	4 kg
CLM-0960	600X600X650 MM	15 kg
CLM-0962	470X320X260 MM	10 kg

Product Enquiry

LABORATORY MIXER

Product Code

CLM-0130	Laboratory Mixer 10 L
CLM-0131	Spare Bowl for CLM-0130
CLM-0132	Spare Whisk for CLM-0130

Models for 220-240V 50-60 Hz, 1 ph	CLM-0130
Models for 110-120V 60 Hz, 1 ph.	CLM-0130-N

The CLM-0130, 10 L capacity mixer is designed for the mixing of soil and asphalt samples to be used for mechanical tests such as compaction, indirect tensile, Marshall etc. The mixing head rotates at speed positions from 10 to 240 rpm and the whisk from 20 to 480 rpm. The user can adjust the rotation speed between given values easily by using a control knob fitted to the machine.

The Laboratory Mixer is supplied complete with;

• Bowl, Stainless Steel, 10 L.

• Whisk

Dimensions	700x750x800 mm
Weight (approx.)	75 kg
Power	550 W

Product Enquiry

LINEAR SHRINKAGE

Product Code

CLM-0235

Linear Shrinkage Mould

Standards

BS 1377:2

The CLM-0235, Linear Shrinkage Mould is 140 mm long and 12.5 mm radius and is used for

the determination of the total linear shrinkage of soils, and indicates the plastic properties of

soils with low clay content

Dimensions	20x30x160 mm
Weight (approx.)	0,3 kg

Product Enquiry

LIQUID LIMIT CONE PENETROMETER

Product Code

CLM-0180	Semi-Automatic Penetrometer for Liquid Limit
CLM-0182	Liquid Limit Penetration Test Cone, Stainless Steel, 30° Angle, 80gr
CLM-0183	Cone Test Gauge for 30° Angle Cone
CLM-0184	Liquid Limit Penetration Test Cone, Stainless Steel, 60° Angle, 60gr
CLM-0185	Cone Test Gauge for 60° Angle Cone
CLM-0186	Liquid Limit Penetration Test Cone, Stainless Steel 30° Angle, 100gr
CLM-1435	Penetration Sample Cup / Moisture Content Tin with Lid, Ø75x50mm, Aluminum
CLM-1440	Penetration Sample Cup with Lid. Ø56x30 mm, Aluminium
CLM-1442	Penetration Sample Cup with Lid. Ø56x40mm, Aluminium

Models for 220-240V 50-60 Hz, 1 ph	CLM-0180
Models for 110-120V 60 Hz, 1 ph.	CLM-0180-N

Standards

BS 1377:2; NF P94-052-1; CEN ISO/TS 17892-6, 17892-12

A Cone Penetrometer is used to determine the moisture content at which clay soils

Passfrom a plastic to a liquid state, and used also for the determination of undrained

shear strength.

The CLM-0180 Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron

base with course and fine leveling screws, a digital penetration measurement gauge

0.01 mm resolution/readibility and an automatic penetration timer unit.

The CLM-0180 is equipped with a digital, 99 second timer, which can be set to the

standard 5 second free-fall time or to some other setting for customized tests.

When engaged the timer will allow the needle to free fall into the sample for the

specific time interval and then lock the needle from advancing while providing a

direct reading of the test results.

Penetration cone/s, cone test gauge/s and sample cups should be

orderedseparately

CLM-1435	Ø(75±2) mm x h (50±2) mm
CLM-1440	Ø(56±3) mm x h (30±2) mm
CLM-1442	Ø(56±3) mm x h (40±2) mm

Angle Weight	Angle	Weight
CLM-0182	30°	80 gr (together with its sliding shaft)
CLM-0184	60°	60 gr (together with its sliding shaft)
CLM-0186	30°	100 gr (together with its sliding shaft and additional mass)

Dimensions	260x240x600 mm
Weight (approx.)	10 kg

Product Enquiry

LOSS OF IGNITION

Product code

Care lab is a provide both readymade (ready stock) and customized muffle furnace systems to our customers worldwide.these laboratory muffle furnace units are utilized in general purpose heating in laboratories,ashing testing wool,rubber,fibers or fabrics,heat treatment requirements for gears and various research facilities in chemistry and physics.

Muffle Furnace Applications

Ignition tests	Gravimetric analysis
Heat treating steel parts and gears	Heat treating gears
Coal sampling	Quench testing
Organic and inorganic ashing	Research facilities in chemistry
Chemical analysis	Annealing loss determination
Soils & aggregates cement testing	Development of coating and ceramics
Glass blowing lab rice laboratory	Rice laboratory
Plastic tensile strength test	Stoneware samples firing

Features:

Sturdy construction for long term use	Compact in design and space saving
Available with 800°c to 1800°c temperature	Safe and trouble free performance
Microprocessor pid controller	Over temperature and short circuit breaker
High ceramic fiber blanket and board insulation	Ventilation or chimney at the back
Only branded heating elements are used	Uniform heating inside chamber
CE and ISO marked	Comply to din and astm standards

Temperature range:

To meet unique needs of every application,our muffle furnaces or box furnaces are available in temperature range from 800°c to 1400°c (800°c,1100°c,1200°c and 1400°c), in addition,we also design and manufacture high temperature muffle furnace up to 1800°c (1500°c,1600°c,1700°c, and 1800°c)

Usability & performance:

Usability is oneof the major factors that one should look into while buying muffle furnace and with bionics muffle furnace systems you experience unmatched convenient working performance. all our electric muffle furnaces feature rust and corrosion free stainless steel housing,compact and light weight construction and branded heating elements and programmable pid controller, ensure safe operation every time.

Safety features:

These muffle furnaces are microprocessor controlled programmable muffle furnaces that offer easy and safe operationeven at high temperature.these systems are designed with your safety in mind.multi-layered insulation keeps external surfaces (cabinet) cool to the touch.door safety switch (optional accessory) stop power to heating elements when dooris copened.

Data recording

In order to keep the record for processing, these muffle furnaces can be optionally fitted with digital data logger,printer and temperature chart recorder.