| Specification | |
| System | Two-in-one Valve based continuous flow |
| A) CPAP and IPPR | |
| B)Bubbler based Buddle CPAP | |
| Display | *Digital and Analog Display of CPAP pressure in CPAP Mode |
| *Continuous Digital display of delivered pressure in IPPR Mode | |
| Alarm | CPAP High and Low Alarm (Audio Visual) |
| Pressure Gauge | -20 to 100 cm H₂O |
| Gas Mixing | Accurate Gas Blender from 21% to 100% FiO₂ |
| Air Source | Accurate Gas Blender from 21% tokl |
| O2 Source | Inlet for Oxygen Gas (20 to 60 PSI) |
| Power | 230V A.C. 50Hz |
| Accessories | HD-Plus Humidifier, Breathing Circuits (Disposable), CPAP Interface , Nasal Prongs , Dummy Test Lung |
| Specification | |
| System | Two-in-one Valve based continuous flow |
| A) CPAP and IPPR | |
| B)Bubbler based Buddle CPAP | |
| Display | *Digital and Analog Display of CPAP pressure in CPAP Mode |
| *Continuous Digital display of delivered pressure in IPPR Mode | |
| Alarm | CPAP High and Low Alarm (Audio Visual) |
| Pressure Gauge | -20 to 100 cm H₂O |
| Gas Mixing | Air-Oxygen Mixer using calibrated Rotameters |
| Air Source | Inbuilt Air Compressor (20 to 60 PSI) |
| O2 Source | Inlet for Oxygen Gas (20 to 60 PSI) |
| Power | 230V A.C. 50Hz |
| Accessories | HHD-01 Humidifier, Breathing Circuits (Disposable), CPAP Interface , Nasal Prongs , Dummy Test Lung |
| Specification | |
| System | Two-in-one Valve based continuous flow |
| A) CPAP and IPPR | |
| B)Bubbler based Buddle CPAP | |
| Display | Analog Display of delivered pressure |
| Pressure Gauge | -20 to 100 cm H₂O |
| Gas Mixing | Air-Oxygen Mixer using calibrated |
| Air Source | Inbuilt Air Compressor (20 to 60 PSI) |
| O2 Source | Inlet for Oxygen Gas (20 to 60 PSI) |
| Power | 230V A.C. 50Hz |
| Accessories | HHD-01 Humidifier, Breathing Circuits (Disposable),CPAP Interface , Nasal Prongs , Dummy Test Lung |
| Specification | |
| System | Bubbler based bubble CPAP |
| Gas Mixing | From 21% to 100% FiO₂ Inno- Res: Air-Oxygen Mixer Using calibrated Rotameters |
| Air Source | Inbuilt Air Compressor (20 to 60 PSI) |
| O2 Source | Inlet for Oxygen Gas (20 to 60 PSI) |
| Power | 230V A.C. 50Hz |
| Accessories | Res-P: HD-Plus Humidifier, CPAP Interface, Breathing Circuits(Disposable), Nasal Prongs,Dummy Test Lung Inno-Res: HHD-01 Humidifier,CPAP Interface, Breathing Circuits (Disposable), Nasal Prongs, Dummy Test Lung |